1 / 14
BRINKO FLUX RACE CAR V1 — zdjęcie 1
1 / 14

BRINKO FLUX RACE CAR V1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modular 3D-printed WIFI controlled car designed as a functional demonstration of BRINKO FLUX system

Ocena
0 / 5
Polubienia
4
Pobrania
16
Wydruki
0
Wyświetlenia
99
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Printing intructions

All parts are designed to be printed in PLA or (not recommended) ABS, with the exception of pin2 and pin2_C_B_array, which function as system connectors and should be printed in TPU.

  • 0.2mm layer recommended

  • 3 to 10% infill

  • 3 to 4 outer walls (wall count)

  • Mouse ears for bed adhesion

  • Minimal supports

Description

Brinko Flux Racecar v1 is a modular 3D-printed car designed as a functional demonstration of the Brinko Flux construction system.  Designed as a collectible and technical object for users over 15 years of age.

The model combines a chassis, interchangeable parts, and a structure optimized for 3D printing, allowing dimensions, components, and configuration to be modified without redesigning the entire vehicle.

This racecar is intended as an experimentation platform: it can be adapted for different engines, electronics, and mechanical configurations, serving both as a functional vehicle and as a starting point for new designs.

Brinko Flux seeks to combine hands-on learning, rapid prototyping, and maker creativity in an open, scalable system geared toward digital manufacturing.

 The vehicle is a simple RC car with:

  • Rear-wheel drive (2WD)

  • Front steering

  • Two DC motors

  • No differential

Wireless control via web interface. The design prioritizes mechanical simplicity, component accessibility, and ease of assembly.

Components & Hardware

This project is designed for flexibility. You can source the components and assemble the circuit yourself, or save time and ensure a perfect fit by purchasing our custom BRINKO Interface PCB. Our physical hardware simplifies the wiring, reduces the footprint, and guarantees a stable connection between all sensors and controllers.

  • 1x ESP32 C3 Super Mini Microcontroller

  • 2x L293D 2-Channel H-Bridge Motor Controllers

  • 1x SG90 Micro Servo (9g)

  • 1x TCRT5000 Optical Infrared Sensor

  • 1x 5000mAh Power Bank

  • 2x 6V Metal Gear Motor (30:1 ratio, D-type shaft)

BRINKO MotorHub v1 https://ko-fi.com/s/9e32f27cc2

BRINKO MotorHub V1 PCB only (10 pieces) badge https://ko-fi.com/s/d776bd3e4b

BRINKO MotorHub v1 GERBER https://ko-fi.com/s/03b56153d1

Firmware

Get your hardware moving in minutes. We provide pre-configured, open-source code optimized for the ESP32 C3.

About the Project

BRINKO is an evolving ecosystem of modular parts and robotics. Explore the full vision and find more resources here:

Tagi