BRINKO FLUX RACE CAR V1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular 3D-printed WIFI controlled car designed as a functional demonstration of BRINKO FLUX system
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing intructions
All parts are designed to be printed in PLA or (not recommended) ABS, with the exception of pin2 and pin2_C_B_array, which function as system connectors and should be printed in TPU.
0.2mm layer recommended
3 to 10% infill
3 to 4 outer walls (wall count)
Mouse ears for bed adhesion
Minimal supports
Description
Brinko Flux Racecar v1 is a modular 3D-printed car designed as a functional demonstration of the Brinko Flux construction system. Designed as a collectible and technical object for users over 15 years of age.
The model combines a chassis, interchangeable parts, and a structure optimized for 3D printing, allowing dimensions, components, and configuration to be modified without redesigning the entire vehicle.
This racecar is intended as an experimentation platform: it can be adapted for different engines, electronics, and mechanical configurations, serving both as a functional vehicle and as a starting point for new designs.
Brinko Flux seeks to combine hands-on learning, rapid prototyping, and maker creativity in an open, scalable system geared toward digital manufacturing.
The vehicle is a simple RC car with:
Rear-wheel drive (2WD)
Front steering
Two DC motors
No differential
Wireless control via web interface. The design prioritizes mechanical simplicity, component accessibility, and ease of assembly.
Components & Hardware
This project is designed for flexibility. You can source the components and assemble the circuit yourself, or save time and ensure a perfect fit by purchasing our custom BRINKO Interface PCB. Our physical hardware simplifies the wiring, reduces the footprint, and guarantees a stable connection between all sensors and controllers.
1x ESP32 C3 Super Mini Microcontroller
2x L293D 2-Channel H-Bridge Motor Controllers
1x SG90 Micro Servo (9g)
1x TCRT5000 Optical Infrared Sensor
1x 5000mAh Power Bank
2x 6V Metal Gear Motor (30:1 ratio, D-type shaft)
BRINKO MotorHub v1 https://ko-fi.com/s/9e32f27cc2
BRINKO MotorHub V1 PCB only (10 pieces) badge https://ko-fi.com/s/d776bd3e4b
BRINKO MotorHub v1 GERBER https://ko-fi.com/s/03b56153d1
Firmware
Get your hardware moving in minutes. We provide pre-configured, open-source code optimized for the ESP32 C3.
Firmware available here: https://github.com/pablovi33/BRINKO-FLUX/tree/main
About the Project
BRINKO is an evolving ecosystem of modular parts and robotics. Explore the full vision and find more resources here:
About BRINKO project here: https://linktr.ee/brinkoparts
