MagSafe charger G-clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sleek and flexible charger solution
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed this MagSafe Charger solution from "G-Clamp fully printable by joehann", its Thingiverse link: https://www.thingiverse.com/thing:1673030. I designed it to fit my iPhone 16 with some clearance, it has a 30 degree tilt upwards, so measure and check before printing to make sure that your device fits too.
For the frame I used the clamp_frame_long.stl as a starting point. It works with all the original clamp_protector and thread_and_knurling_knob variants.
You need to first push the plug and cable through the cutout from the front, then you can fit snugly the charger. (I originally designed the cutout for the USB-C variant of the charger, but it should fit the Lightning cable as well). Due to the lack of space and my desired orientation I didn't use the original clamp_protector on the end of the thread (see pictures).
I used Natural coloured Prusament ASA.