Dust cover for MPO/MPT connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust cover for MPO/MPT conenctor (both male/female compatible)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Dust cover for MPO/MPT connenctor
This dust cover is for the calbe with MPT or MPT connectors. I made 4 version. One is with clip which u can snap on the cable (5mm in diameter) and you wont lose it when cap is removed. And one is without clip.
Another 2 version are the same but they are suited for hard materials like PET-G, PLA,...
Yes YOU CAN use PET-G or PLA. But you need to use right STL files because they have different tolarances!
I recommend the clip version print with flexible filament like TPU 98A. PET-G or PLA will work also but you must be careful.
The version witout clip doesnt matter if it is PLA to TPU both will work fine.
〰 The Filament I have used:
Eryone TPU 95A Black
AzureFilm PET-G Black
⚙ My print settings:
When using TPU print slow! - for me its usually 20mm/s
When using TPU I advice to switch from Anarche wall generator to Classic wall generator! I had much better results (less stringing and print turn out better)
❤ If you like the model then don't be shy like it ❤
⬆ if you have any idea for improvements⬆ - dm me📩