Lens Cap for Leica D-Lux 3 / Panasonic Lumix LX2 - Friction Fit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, robust replacement lens cap designed for Leica D-Lux 3 / Panasonic Lumix LX2.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this replacement lens cap because I bought a used camera without one and didn't want to overpay for a spare.
This model is designed for the Leica D-Lux 3 but is fully compatible with its twin, the Panasonic Lumix LX2.
It uses a friction fit mechanism on the outer metal ring of the lens. It holds securely but is easy to remove. The design is simple and rugged, perfect for everyday use.
Open Source Philosophy: I believe in accessible repair parts. I have included the original FreeCAD source file (.FCStd) and the .STEP file so you can easily modify tolerances or add your own logo if needed.
Print Instructions
Rafts: No
Supports: No (Print flat on the face)
Layer Height: 0.2 mm (My setup, but feel free to use your preferred resolution)
Top & Bottom Layers: 6 (To ensure the cap is solid and fully light-proof)
Filament: PETG (Recommended for better flexibility and heat resistance compared to PLA)
Notes from the Maker: This was printed successfully at 150 mm/s using budget PETG on a Neptune 3 pro.
Material: I strongly recommend PETG for the slight flex which helps the friction fit, but PLA should work too.
Tolerances: The fit is designed to be snug. If your printer is not perfectly calibrated, or if it feels too tight/loose, try scaling the model by ±0.5% in the X/Y axis in your slicer.
Happy Printing!