LED Channel / Strip Holder for Versa Fix 4×6 LED Strip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim LED channel for Versa Fix 4×6 LED strips with solderless jumper-wire power connection.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This is a slim LED channel designed specifically for the Versa Fix 4×6 LED strip. The strip fits tightly inside the channel and stays securely in place without additional fasteners.
Power is supplied in a simple way by pushing two jumper wires directly into the dedicated opening in the model, making soldering unnecessary. The fit is intentionally tight. I printed this model in PLA (Prusament PLA Prusa Galaxy Black), and I recommend inserting the jumper wires immediately after printing, while the PLA is still warm and slightly flexible. Small tools such as pliers and a flat-head screwdriver are helpful.
To allow heat from the LED strip to dissipate properly, I recommend using low infill to avoid unnecessary internal air pockets. For best surface quality, set the top layer direction lengthwise so the lines run along the channel.
I mounted the LED channel inside a cabinet using double-sided tape, which has worked well in practice.