1 / 2
LED Channel / Strip Holder for Versa Fix 4×6 LED Strip — image 1
1 / 2

LED Channel / Strip Holder for Versa Fix 4×6 LED Strip

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Slim LED channel for Versa Fix 4×6 LED strips with solderless jumper-wire power connection.

Rating
0 / 5
Likes
2
Downloads
11
Makes
0
Views
102
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution

This is a slim LED channel designed specifically for the Versa Fix 4×6 LED strip. The strip fits tightly inside the channel and stays securely in place without additional fasteners.

Power is supplied in a simple way by pushing two jumper wires directly into the dedicated opening in the model, making soldering unnecessary. The fit is intentionally tight. I printed this model in PLA (Prusament PLA Prusa Galaxy Black), and I recommend inserting the jumper wires immediately after printing, while the PLA is still warm and slightly flexible. Small tools such as pliers and a flat-head screwdriver are helpful.

To allow heat from the LED strip to dissipate properly, I recommend using low infill to avoid unnecessary internal air pockets. For best surface quality, set the top layer direction lengthwise so the lines run along the channel.

I mounted the LED channel inside a cabinet using double-sided tape, which has worked well in practice.

Tags