Shotgun Shell __ Rear Loading __ 1-2 Darts __ X-Shot Micro 2.0 Reshell 7/5 (Domochevsky)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shell for 1-2 darts __ REAR LOADING is possible so you also can leave it in the blaster to load it directly there.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 83
- Wydruki
- 2
- Wyświetlenia
- 970
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
"Shotgun" Shell (for 1 - 2 Short Darts or 1 Elite Dart)
>>> [ no inline clip! ]
for the X-Shot Micro2.0 Reshell 7 and Reshell 5 by Domochevsky
Rear loading is possible so you also can leave the shell in the blaster to load it directly there.
The shell also functions, so to speak, as a breech loading barrel.
Max. fps test with X-Shot Short Darts or X-Shot Airpocket Darts and the Micro2-R7:
1x Short Dart: ~ 78 fps
2x Short Dart: ~ 65 fps
1x Elite Dart: ~ 78 fps5x Caliber .50 Foam Ball: ~ 65 fps
1x Caliber .50 Foam Ball: ~ 78 fps
-----------------------------------------------------------------------------------------------------------
It needs approx. 11g of filament.
The file is already pre-oriented.
My print settings for PLA:
0,2mm layer height
4-5 walls
20% gyroid or cubic infill
7 top and bottom shell layers
no supports needed
Thanks to Domochevsky for the file I could use for this remix.