PC4 plug, filament capture, PFTE tube clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seal your drybox, filament stays with the plug, so no need to open the box once you need it again. Clips to PFTE tube.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 98
- Wydruki
- 5
- Wyświetlenia
- 278
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Plug a drybox closed and capture/retain filament in it so that you don't have to open the dryboxes to fetch filament.
It clips to a PTFE tube when not in use.
This .3mf now prints well on my printer and this particular PETG filament, but you will probably have to adjust scale a bit to fit your setup. Turns out narrow holes and narrow contours are tricky.
Print in PETG if possible, since it has the highest resistance to moisture ingress of the regular plastics. (Unless you can successfully print this in PP). Print with 99 walls/perimeters, so that the part is solid.
IKEA 365+ 10.6l Drybox mod I used.
Drybox passthrough I used.