Duckie's DIY drying/annealing/tempering lab oven control panel adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed adapters for Black+Decker TO1216B control panel to needed controls for PID drying/annealing/tempering lab oven
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
These are adapters to change mounting points or cover un needed holes or in Black & Decker TO1216B toaster oven control panel for custom controls. I have recently delved into more technical/engineering filaments that require higher drying temps and annealing as part of post processing. Given my wife would have my head if I did either of those processes in the kitchen oven I picked up a toaster oven with the intent of gutting the controls and making it a DIY PID controlled lab oven. These files are my initial rendition (I'm actually printing the first test at the time of writing) so forgive the lack of photos and expect updated files and more project documentation here shortly.
All parts designed to use M3x6 socket head screws and M3 nuts. STL files are pre-oriented for printing. It is recommended to use PETG or better in terms of heat resistance. I have been using PA6-CF carbon fiber nylon.
STEP and .f3d files provided below for remix/modification