Liczymy pasujące modele…
A spooky spider-motif dice box for the Witch, Drider, Drow, or other Spooky player at your table. It's even a named magic item: The Spider's Clasp I am aiming for a mix of spider and victorian design elements, and a general style of an…
Wydruk około 8,24 €–10,07 € nettoWstępna wycena jednego wariantu
Cable Organizer for USB and other IT/computer Cables. Designed with a focus to optimize and reduce filament demand to the max. Very lean version for rapid an easy print. Easy to print with PLA or other remaining filament which is…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Lean version of a USB cable holder prints of various hight are possible by just finish printing at the desired thickness. No support needed. PLA material used, 0.2mm resolution. 12mm printing height requires 9 Min. printing time @ 100%…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
A creepy spider to send shivers down your spine this Halloween! Use tree supports, brim, back seam position. ✅ 25 mm tall – small but terrifying presence ✅ Perfect for pranks, spooky decorations, or hiding around the house 🕸 ✅ Easy and…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Printing a floating spiderweb mid-air and direct print a spider on it, all without support? Is it possible? The original idea. I can't remember exactly when this idea originated in my brain (probably short circuit), but after the many…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
8-bit Spider-Man Magnet. Print at 0.20mm Color change settings. Start with black to 3.20 Red till 4.20 Blue till 5.2 Finish with white. Use 2 10x2mm magnets. No glue needed just press fit. Try it with ironing turned on. Check out my other…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
Printed in Prusament PLA: Jet Black Lipstick Red (@ layer 0,5) Galaxy Black (@ layer 1,0) Pristine White (@ layer 1,5) 0,1 IS Fast Detail 100% infill
Wydruk około 2,39 €–2,92 € nettoWstępna wycena jednego wariantu
Modified so the part cooling duct and extruder cover/fan mount is 8.3mm lower to suit the standard Phaetus Rapido and volcano hotends. Only the version without LED mount provisions is provided. EDIT: By request, have uploaded a 3mm version.
Wydruk około 2,37 €–2,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
11 Aug 22 - I've since made a better version, based on the remixed Delta P X2. It uses a modified extruder cover/fan mount and part cooler but keeps the original internal design intact.…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
100x160mm sign, reading “There Ain't No Stupid Questions.” Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs .
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
Let's Retract! Spider-Man Web Only. Print at least 150mm height. 3 perimeters. To show support please like my designs. :P Time-lapse print video : https://youtu.be/SaA_DnNp9xM Category: Sculptures If you want to customize your guitar,…
Edit 8/28/25: CHECK OUT THE NEW AND IMPROVED VERSION HERE! Edit 12/8: Added a “repaired” version of the leg armor, hopefully this fixes issues some have been having. I kept printing myself more and more armored legs to give them a bulkier…
CUTE KNITTED SPIDER - Print-in-place - Minimal supports required Join my Patreon to get full access!
This is 3D printable model of the Intrepid Class NCC-74656 Voyager from the Star Trek. The model has the variable geometry pylons so it can be displayed with the pylons down or up like in a warp. It is a kit so no glue needed. The…
https://paypal.me/radicalreel Remix of MerganMcFergan's Gizo the spider. I'm not a fan of rafts so i made a Brim which is only partially conneced. I added slight support too source: www.thingiverse.com/thing:5044727
This is a modified version of packout hangers from blahblahblahresearch. I wanted these to have the recess for the charger's base feet to be 90 degrees from the original design and far less tall so that the charger is more stable in the…
THE NEW AND IMPROVED SPIDER LEGS, NOW WITH ADDED POLYGONS! For a long time, I've wanted to redo the old Spider Legs model. It was the second Dummy mod I ever did, and over time I've noticed all of the little errors I made more and more,…
Striking 3D printed spider table lamp — a bionic art night light for desk or wall, casting dramatic geometric shadows. Fits the tBulb B/S dimmable USB LED module (tBulb S recommended for wall mounting). id : se1008888 size : 255X134X321mm…
I was making a modification to the EVA 2.4.2 toolhead that allowed the use of a Rapido UHF hotend. I tried to find a STEP model for it online but after ~30m of searching, I couldn't find the ultra high flow (UHF) variant as a model. I…
Spooky spider fridge magnet If you like it --> press like it :-) Here a model of the famous spider model from Jason C Kessler. I´ve added two sockets for magnets 5x3mm. Just make a pause at the top of the installation space(look before in…
Decorate the frames of your doors
Update : I'm going to leave this post up, but I would recommend AGAINST using my files for this mod. Instead use the github project below that is more complete.…
by Retrorobotis Original https://www.thingiverse.com/thing:5235035
Spiderman PS5 Front Shell Edition
Scarlet Spider-Man Inspired face Shell Uses 5mm-X-1mm magnets Face Shell with No Holes is so you can use any magnets you like. Enjoy (5/30/21) There was a issue with scaling on the X axis with a few of the face shells, This is fixed now.…
Every time I pulled the battery out of my rapid charger it felt like the charger was going to come off the wall. So I went ahead and designed something to prevent that from happening. Now I can pull a battery out of the charger with one…
This is a remex of the excellent model by David Metlesits and FleetPrinter: https://www.thingiverse.com/thing:4614314 I have made it more easier to assemble by re-splitting it into parts and adding alignment pins so that the parts go…
Ben Riley inspired Spider-man Face Shell Uses 5mm-X-1mm magnets Face Shell with No Holes is so you can use any magnets you like. Enjoy I will have a mesh sheet uploaded soon for all my face shells. Category: 3D Printing
spiderman qui sort du tableau… pas de réglages particuliers Je vous souhaite une bonne impression
Toolhead to be mounted on every 3D printer with Linear Rails MGN12H mounted on side (not on top of aluminium extrusion). Remix is adapted to use with Orbiter v2.0 extruder and Rapido HF hotend. On images toolhead mounted on Biqu B1 (if…
I think I've really outdone myself this time. I'm a huge fan of Drow and Driders in D&D, and it upsets me that there have not yet been official 5e adventures published featuring the queen of them all, Lolth. However, when Magic the…
A cave spider. Category: Toys & Games
I grabbed an SVG file of Spiderman after a quick Google search and turned it into a 3D printed plaque with a bit of PrusaSlicer layer colour swap magic
Spiderweb wall decoration You can create modern decoration with low use of materials. Infill: 100% Layer height: 0.2mm
Unleash the terror of the Shadowweaver Spide r, a formidable miniature for your tabletop adventures! Standing at 30x30x9mm, this intricately detailed monster is perfect for Dungeons & Dragons campaigns or any fantasy role-playing game.…
prints in about 2 hours with .2 mm layer,15% infill and 2 perimeters
Coasters Spiderweb Prints easily, no support needed. Box designed to hold up to 4 coasters. Print settings : - 10-15% infill - 0.2mm layer height - PLA Black and White from Ariane plast All my designs are copyrighted, so you can't sell…
the colored images are a render with a texture, the model itself is one color.
A take on norwegiancreation's PID ball balancing seesaw using an Arduino. Video of this working: https://gyazo.com/a7e7b8c4ef73c828a3449bddea8c76b7 https://gyazo.com/194d471b278426e594c36b10ec67122b…
The improved fan duct is a remix of a very good upgraded fan duct from KalleKnall. https://www.printables.com/model/39679-prusa-mk3s-and-mk3s-fan-duct-with-pinda-support. I've modified it so it will fit as a direct replacement for the…
Would like to thank Okef256 for the original model. It doesn't seem to get much attention, but it is great. Modifications: Modified mount to attach to Ender 5 mount plate instead of linear rails. Added hex holes to allow install with 3mm…
I modified the spider to be used for D&D as a Giant Spider. mountspider.stl is to be used for spiders that players want to mount spider1.stl is the normal STL for Giant Spiders
My new room decoration is done. I still have a lot of glowing in the Dark Filament left and it was perfect for that.
Spider-Man model. Prepared for handpainting 0,16 layer, 5% gyroid infill, 2 walls, organics/tree supports
Spider Quadruped Robot | ESP32 Powered 8-DOF This is an agile, 4-legged spider robot (quadruped) built for smooth movement and wireless control. By upgrading the classic frame with an ESP32 , this build gains WiFi/Bluetooth capabilities,…
This is a simple guy plate for the SpiderBeam 7m portable Fiberglass pole. There are 2 versions, TIGHT and LOOSE. The tight one will fit snuggly against the pole, The loose one will be able to freely move when it is on the pole. This guy…
This is a fun beginner project for anyone to make! It is a four legged spider robot platform using Raspberry Pi as the brain, 3D printed parts as the body, and many readily available electronics from amazon or banggood. No custom PCB is…
Showcase automotive artistry with this 3D printable STL model of the stunning Alfa Romeo 8C 2900 Spider. Revered as one of the most beautiful cars ever made, its flowing lines and powerful legacy make it a prized addition for classic car…
Capture the spirit of classic Italian motoring with this 3D printable STL model of the Fiat 124 Spider. This charming convertible model is perfect for automotive enthusiasts looking to display the iconic design and open-air freedom of…
Assembly instructions Print all parts. (Note: No support needed, but your printer should be able to handle 60 degrees of overhang) Prepare a thin foil e.g. Overhead film as shown in the picture below* * If you print the window version,…
Title says it all. A tool steel nozzle stripped the threads of my CHCB-OT hotend, and I really didn't like the original Creality hotend. Relocates Nozzle MCU Board and heat break cooling fan. Currently working on a new…
This is my take, or attempt, at making a Drow Spider Priestess Statue. I have scaled this at 200%. Feel free to scale it to your desired height.
Spooky spiderweb decoration to tack in the corner of a doorway.
The reason I made this toolhead was to take advantage of Phaetus's hotend attachment for their APUS extruder, and more importantly I just like how the wheel spinning on the apus looks. Fusion files can be found here:…
Several parts were merged in order to save weight on these parts of the EVA 3 printhead. Hence, it looses it's modularity, but also sheds lots of weight. Not including the no longer needed screws and heat inserts the weight went down from…
Cooling duct for the stepper drivers for my custom Voron build. It suites 6 or 7 steppers drivers. Pick the file you need. Note: didn't test the 7-stepper driver version, since my printer has only 6 (extruder is on the toolhead board).
Description: A spooky and stylish spinning top in the shape of a spiderweb, created especially for Halloween. Width: 50 mm Unique web-inspired design with an easy-to-grip handle for smooth spinning. Can be printed either as a single solid…
FR Modifications apportées aux fichier d'installation du RapidChange sur une Genmitsu en optimisant son volume de travail. Le fichier zip contient toutes les macros pour installer 4 fraises différentes. ATTENTION, certaines valeurs…
Just a small spider hide. Adhere a magnet and attach to the side.
A fan duct for Phaetus Rapido which utilizes a 40mm fan. Has a locating lip near the bottom to prevent upward movement due to the heat sink's conical shape. Category: 3D Printer Parts
Easy to print rapidfire underdesk mount.
Pole mount for a solar power Meshtastic node. Use PETG for best strength and weather durability. Solar panel holes are slightly out of alignment but work, I'll fix that and re-upload sometime in the future. Case:…
This is an UNTESTED toolhead for the Voron V0.1. I don't currently have the parts to build this toolhead and I don't have plans to ever try it. I just got a bit bored. I'm assuming that a fan saver is required due to how close the heater…
Do you hear tiny skittering followed by the gentle creak of a haunted front door? That’s this adorable abomination: a fairytale cottage that grew legs, eyeballs, and opinions. It scuttles into your display case like, “hi, we’re your new…
I do not recommend that you use a Rapido . It's a great hotend and has performed well, but it's just better to stay in the developed ecosystem and save yourself the headaches of a custom job. I like what I have but I wouldn't do it again.…
This 2D Spiderman is best printed on an AMS/MMU system, but can be printed using manual layer changes with the "spiderman.layerchange" file. Use Arachne wall generation for both to help with the thin black webbing on his suit. "Avoid…
To make this spiderman you will need: 581 Connector Pieces 131 Black Pixel Pieces 127 Red Pixel Pieces 46 Blue Pixel Pieces 20 White Pixel Pieces In the 3mf, it is all sorted out for easy printing. For the red and black pixels, you will…
This is a remix for the excellent remix ( Thingiverse - Digital Designs for Physical Objects - Thingiverse ) of Elescar featuring the same thread and bowden collet insert dimensions - just with 3 arms instead of 2. 2 arms caused some…
Use this if you want to install a Phaetus Rapido on your Tiny M or other sailfin extruder.
A DIN rail bracket for the Fysetc Spider controller with the possibility of adding a layer for two Fly Mellow 5160 pro stepper driver and fans. Each layer can use either m3 nuts or screws (see photos). No supports needed for printing.…
Just a bigger spider house. Adhere a magnet and put on the side.
-layer 0.2 -3 walls -no brim -wall generator arachane and a did whit top surface pattern hilbert curve because a like the effect.. -print in place and scale it how do you want.
Add a Superhero Touch to Your Scouting Adventure
This custom stabilizer is designed to reduce lateral sway and bouncing of Apidura saddle bags during cycling — especially on rough terrain or during high-speed descents. It securely fits between the saddle rails and the top of the bag,…
For this modification, a Phaetus Rapido Hotend 2 HF ( https://www.phaetus.com/products/rapido2 ) and a Sherpa Mini Extruder are required ( https://github.com/Annex-Engineering/Sherpa_Mini-Extruder ). Additionally, I've installed an SKR…
Add a touch of spooky charm to your Halloween setup with the Pumpkin Spiderweb Tray – a festive piece that’s as practical as it is eye-catching. This 3D printed tray is designed in the shape of a classic pumpkin, with a beautifully…
Used Hueforge to recreate that spiderman meme from 60's cartoon. Directions for printing! Print at 0.05mm layer height with initial layer height at 0.16mm 100% infill You can scale on X and Y but don't scale the Z height. Use white, blue,…
Questo è stato il mio primo studio di creazione di un giocattolo flessibile
Requires two hot melt inserts. I placed the wiring on the outside so that it is easy to reach and has a smaller x-offset for the probe. I printed mine with ASA at 100% infill.
Envision a 3D printed "BEWARE" sign, with bold, cracked letters that seem to be carved out of ancient stone. Years of spiders, and webs, have been piling up on this. The surface features faint, glowing cracks and a weathered texture,…
CRTouch mount inspired by mount from @JonasBurkhard. Short variant is for precision positionig of probe with washers. Long variant can be used as it is. I also include modified Fan duct. Original duct and mount can be found here:…
I took the Rapid Burner toolhead parts by Chirpy2605 and crudely adapted it to fit the Peopoly Lancer hotend. The Lancer (long melt zone) from Peopoly's Magneto X is only $35 with a flow rate up to 60mm3/s but I couldn't find any open…
Layer height of 0.20mm Swap Instructions: Start with Red At layer #21 swap to Blue At layer #25 swap to Black At layer #27 swap to Blue
A puzzle inspider by a spider web There are 2 different files: - NO AMS version, one color per plate - AMS version with minimized color waste Print in single color for a greater challenge!
This is a modded SB Rapido Rear for a Carto/CNC Metal Bracket for VORON 2.4/Trident. I have removed the mounting slots and added eyes to the body. Now, when you are working on the toolhead, the SB assembly can not accidentally fall from…
STOOPID MAGNETIC EFFECTOR DIRECT DRIVE, with double magnet give more than double stickyness!! ADV ver. give the effector have CANBUS-like capability.... but this system use USB for data transfer... so no hassle to setup in klipper…
Questo basso rilievo in bianco e nero cattura Spider-Man nella sua iconica tuta nera simbiotica. L'immagine mostra il supereroe in una posa dinamica, con effetti di esplosione e linee di movimento che accentuano il suo potere e la…
Spider Kitty The size can be adjusted in the slicer 25% infill ,quality 0.2 supports no , pla colors can be added in the slicer Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Hi! i spent a while working on this as a halloween costume and thought i would upload it for all of you What You Need: you need four of the “iron spider arm connector” four of the “Iron Spider Arm Bend V2” four of the “Iron Spider Arm Arm…
Split the torso to print without supports and be able to print the shell and interior in separate colors. Included a pin to make sure it is rotated correctly. Picture shows order of assembly. Print Settings Printer: Monoprice Mini Select…
Upgrade your Ender-7 with a direct-drive Rapido2 system. Credits: Márcio Pereira - https://grabcad.com/library/ender-7-complete-x-carriage-1 anderfogel - https://grabcad.com/library/bmg-extruder-2 OpenBuilds -…
FIRST Robotics Competition (FRC) Rapid React Logo
Alojamiento para placa OpenTheremin con motivos de telaraña.
From the Marvel Comics published crossover featuring Spider-Man and Superman, here is the shield featured on the variant cover. It's a Superman shield crossover! As a bonus, I have included a double-sided shield that includes the Bizarro…
