Recirculation / Muffler Mod - Elegoo Centauri Carbon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed version, Read Description.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 212
- Wydruki
- 4
- Wyświetlenia
- 2480
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Removed the blade guard from the model for less air resistance, adjusted the thickness of the duct a tiny bit to avoid crashing and belt rubbing.
You can use the stock phillips screws for the faceplate or you can use these M3 x 14MM screws
Made a version that uses M3 heat set inserts and M3 X 5MM screws (The longer M3 screws will also fit)
I do not recommend using this version if you are going to use the stock exhaust fan as it has potential to hit the belts. I have an auxiliary fume extractor on my printer and have my stock exhaust fan removed.
Go to original post to see instructions
All credit to Juhayy