M42-M42 macro extension tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M42 macro extension tube designed specifically for 3D printing.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
M42 to M42 macro extension tube designed specifically for 3D printing.
Firm grip for secure mounting
Textured internal surface for reduced internal reflections
Working aperture
Chamfered edges to counter elephant's foot
Chamfered threads for easier screwing together
No supports needed
PRINT SETTINGS:
Mandatory:
0.1 mm layer height
4 wall loops (or more)
Smaller thread must point upwards (wide side on the bed)
Do not use supports (brim and/or skirt are allowed)
Strong cooling is needed
Carefully remove bridge platform after printing (see photo #5)
Remove all strings and loose particles after printing
Recommended:
Archimedean chords for top/bottom/solid infill patterns
Zig zag pattern for sparse infill (30% or more)
Black filament (to reduce light leaks)
You can cover internals with non-reflective black paint
Try screwing lens or M42 adapter few times before using with camera (to prevent potential loose particles)
