IFS bracket for Flashforge Adventurer 5X / AD5X
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IFS bracket original mount adapted for printing
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 208
- Wydruki
- 1
- Wyświetlenia
- 935
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
🔧 IFS Bracket – Flashforge Adventurer 5X / AD5X
A simple mounting bracket for relocating the IFS (Intelligent Filament Sensor) on your AD5X.
This model is designed primarily for modders who want to move the IFS to a different location — whether for better cable management, cleaner looks, or to free up space around the original mounting area.
⚙ Hardware Required
You will need to install threaded brass inserts:
M3 threaded bushings
Outer diameter: 4.6 mm
Length: less than 6 mm (recommended: 4–5 mm)
These are melted / press-fitted into the designated holes in the bracket.
🧩 Why This Bracket?
The original IFS location may not suit everyone — especially if you're:
Using an enclosure
Rerouting filament path
Building a custom toolhead setup
This bracket gives you the freedom to mount the IFS wherever it fits your build.
🖨 Print Settings
Setting | Value |
|---|---|
Material | ABS, ASA, PETG, or any rigid filament |
Infill | 100% |
Perimeters | 3–4 |
Supports | Required |
📦 Files Included
STL file(s) for the bracket
STEP / F3D for remixing
🔄 Remix It!
This model was made for the community —
I'm waiting to see your remixes, improvements, and creative mounting solutions!
If you make something cool — share it in the comments.
<3