Skådis (Skadis) - IFIXIT Mako holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis mounts that make use of the ferromagnetic back of the ifixit mako and use Skadis Ultimount
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Info
I wanted to make use of the ferromagnetic back-plate of the IFIXIT Mako and designed these holders for the Ikea Skådis. To use less filament I decided to split the mount. When I installed it to the Skådis it turned out, that the top works better if together. So this could also be merged into one part.
Feedback is very welcome and feel free to remix.
Instructions
Printing
Print 2x skadis-ifixit-mako-bottom and depending on the strength of your magnets 1x skadis-ifixit-mako-top.
Check on which layer the holes for the magnets get closed and add a pause in gcode to add the magnets.
I used ø6x3mm magnets. They were a bit snug, but it might be because of the material.