Ikea Pax corner door reverse hinge adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter and drilling jig to reverse the direction of the corner door on a Pax cupboard.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed materials:
3x BLUM 9350743 CLIP top BLUMOTION hinge
3x BLUM Clip mounting plate
6x or 12x SPAX or equivalent 5x60mm counter-sunk wood screws
6x ~3x16 counter-sunk to mount the hinge plate
2x 5mm wide screws for temporary drilling jig mounting
4mm drill
9mm drill (something with a flat tip, wood drills with centering spike might poke through)
Instructions:
Print the adapters using 4 perimeters and 4 top/bottom layers, ~15% gyroid infill
Print the drilling jig
Attach at the correct height using the 5mm screws
Drill through the 4 holes of the drilling jig, using the 4mm drill, into the cupboard body
I only used the outermost holes and it's more than sturdy enough but you can do all 4
For the center hinge, mind that it needs to be one hole higher than on the original side because the hinge on the door is not perfectly centered
The plastic cover for the corner that comes with the Pax can stay in place. just pull it away locally while working
Attach the mounting plate to the adapter using the 3x16mm screws
Attach the adapter to the cupboard using the the 5x60mm screws
Expand hinge mounting holes on the door using the 9mm drill
Clip the 3x BLUM 9350743 CLIP top into the holes on the door
Clip the door into place
Micro adjust the hinges if necessary