IKEA BILRESA Dual Button Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for the IKEA BILRESA Dual Button Cover for repairs or customization.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About
Usable for repairs or customization, this model can replace the original switch cover of the IKEA BILRESA Dual Button. Their design allows for easy replacement, as the cover can just be popped out for battery changes. You can print the cover in a color of your choice, use the slicer the add negative volumes for text and icons or even embed those in different color if you can print multi-material.
All pictures seen are available as model or created in Prusa Slicer by adding a negative volume or color modifier for text to the base variant.
The part is modeled by hand after measurements from the actual part and tested for functionality.
Model variants
I created this as I did not like the ambiguous button design. Beside the flat model, there are thus also variants with clear 0/I labeling in all directions available. The size of the original cover is 66mm by 36mm, you can find these in the accurate folder. To compensate for shrinking on FDM printers, I've also provided slightly upscaled files in the normal folder. If you did not fine tune your printer for accuracy (less than 1% shrinking) then you want to use the normal files.
Printing
Use a print resolution which can print small details, e.g. 0,15 mm on a 0,4 mm nozzle. Variable layer height can help as well.
Supports for the snap-fits are required. Organic support on build plate should work well and is easy to remove.