Heavy Duty Corner Brackets | M4 L-Brackets Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reinforced L-brackets in multiple sizes (20mm & 40mm widths). Features standard M4 holes and adjustable slotted versions
- Ocena
- 5 / 5
- Polubienia
- 791
- Pobrania
- 1585
- Wydruki
- 4
- Wyświetlenia
- 4750
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
BOM: Printed with ROSA3D High Speed PLA Light Gray
A comprehensive collection of solid, reinforced corner brackets designed for structural projects, DIY repairs, woodworking, or 3D printer frames.
Key Features:
Reinforced Structure: Designed with extra thickness and corner fillets to prevent flexing and breaking under load.
M4 Optimized: All holes are sized generously for standard M4 screws, allowing for easy assembly.
Support-Free: The geometry is optimized to print perfectly without any supports.
The Set Includes Multiple Variations: You can mix and match to find the exact bracket you need:
Widths: Available in standard 20mm (single row of screws) or double-wide 40mm (two rows for extra anti-twist stability).
Lengths: Various leg lengths available depending on how much surface area you need to secure.
Hole Types:
Standard Holes: Fixed circular holes for rigid, permanent joints.
Slotted (Adjustable) Holes: Oblong tracks that allow you to slide and adjust the parts before tightening them down. Perfect for aligning imperfect joints.
Printing Instructions:
Orientation: Print flat on its side (L-shape lying down on the bed) for maximum layer strength across the corner.
Material: PETG, ASA, ABS, or PLA+ (Standard PLA is okay for light loads, but PETG/ABS is better for structural integrity).
Infill: 30-50% (Grid, Gyroid, or Cubic).
Perimeters/Walls: 4 to 6 walls. (For structural parts, adding more wall loops makes the part much stronger than adding infill).