CM3588 NAS Kit enclosure with dual fans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CM3588 NAS Kit enclosure which supports installing 2 fans. There are two variants, one for low-profile fans.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
CM3588 NAS Kit enclosure
I wanted to create an enclosure to support 2 low profile (10mm thick) 80mm fans.
More info can be found here: https://wiki.friendlyelec.com/wiki/index.php/CM3588_NAS_Kit
What you'll need:
8 pieces of M3 bolts (somewhere around 6mm in length) and 8 pieces of M3x5.7 heat set inserts ( I used these ones: https://www.ruthex.de/en/products/ruthex-gewindeeinsatz-m3-100-stuck-rx-m3x5-7-messing-gewindebuchsen).
2 fans, though it's optional, otherwise you'll have 2 giant holes on top. :)
2 fan grills (optional)
some dust filter cut to size (optional)
The installation process is straight forward. Install the heat set inserts, lay the PCB in, install the fans on the lid and screw the lid on top of the case.
Model variants
There are 4 variants of the lid and 2 of the bottom part.
If you want to install regular sized (25mm thick, not low-profile, 10mm thick) fans, go for the "cm3588_bottom_more_clearance" model.
With the lid the only difference between the variants apart from the supported fan size, is the thickness of the part where you mount the fans and grills.
Extra notes:
The enclosure has functioning button knobs. No need to print any extra parts.
More models are coming in the future as my time allows it.
I am planning to install TPU feet at the bottom, so some slots for them are expected to appear in newer versions.
I might work on the lid a bit, so it has some built in grill for the fans.
Any review is appreciated and welcome, this is mainly for my own purpose, I just decided to share it with the world, maybe someone else will be able to use it as well.
Printing
I had success with printing it at 0.2mm layer height with a 0.4 nozzle. I used PETG, color changing filament.
Extra hardware:
https://www.amazon.de/-/en/Assortment-Hexagonal-Cylinder-Hexagon-Machine/dp/B0CY1ZR8XS (any kind will do really, though these should fit nicely in the indents)
Fans I tried:
https://www.amazon.de/dp/B0DQ4M9F68?ref=ppx_yo2ov_dt_b_fed_asin_title
https://www.amazon.de/-/en/Noctua-NF-A6x15-5V-PWM-Premium/dp/B0DJP3987K
Example grills:
https://www.amazon.de/-/en/Noctua-NA-FG1-8-Grille-80mm-Black/dp/B0B212TN4C
https://www.amazon.de/-/en/AABCOOLING-Grill-Silver-Metal-Filter/dp/B075Q8M4VQ
https://www.amazon.de/-/en/Noctua-NA-FG1-6-Grille-60mm-Black/dp/B0B1QRWHW3
I haven't tested any but it might even work with 3d printable grills.