1 / 13
CM3588 NAS Kit enclosure with dual fans — image 1
1 / 13

CM3588 NAS Kit enclosure with dual fans

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

CM3588 NAS Kit enclosure which supports installing 2 fans. There are two variants, one for low-profile fans.

Rating
0 / 5
Likes
0
Downloads
9
Makes
0
Views
112
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

CM3588 NAS Kit enclosure

I wanted to create an enclosure to support 2 low profile (10mm thick)  80mm fans. 

More info can be found here: https://wiki.friendlyelec.com/wiki/index.php/CM3588_NAS_Kit

What you'll need:

The installation process is straight forward. Install the heat set inserts, lay the PCB in, install the fans on the lid and screw the lid on top of the case.

Model variants

There are 4 variants of the lid and 2 of the bottom part.

If you want to install regular sized (25mm thick, not low-profile, 10mm thick) fans, go for the "cm3588_bottom_more_clearance" model.

With the lid the only difference between the variants apart from the supported fan size, is the thickness of the part where you mount the fans and grills.

Extra notes:

The enclosure has functioning button knobs. No need to print any extra parts.

More models are coming in the future as my time allows it. 

  • I am planning to install TPU feet at the bottom, so some slots for them are expected to appear in newer versions.

  • I might work on the lid a bit, so it has some built in grill for the fans. 

Any review is appreciated and welcome, this is mainly for my own purpose, I just decided to share it with the world, maybe someone else will be able to use it as well.

Printing

I had success with printing it at 0.2mm layer height with a 0.4 nozzle. I used PETG, color changing filament.

Extra hardware:

Fans I tried:
Example grills:

I haven't tested any but it might even work with 3d printable grills.

Tags