Counting matching models…
After a successful print, rinse with water for a smoother finish. Mini Pocket Slide Box – Compact Organizer in 3 Sizes Keep your small essentials organized and secure with the Mini Pocket Slide Box. Featuring a smooth sliding lid and a…
16cm x 8cm small shelf panel for IKEA Skadis board. The fixture is snug fit providing a very sturdy platform for displaying small objects. A small bump is added in the middle for extra security. The panels can be placed side by side.…
8cm x 8cm small shelf panel for IKEA Skadis board. The fixture is snug fit providing a very sturdy platform for displaying small objects. A small bump is added in the middle for extra security. The panels can be placed side by side.…
I extended the 5cm box to make it 6cm, 7cm, 8cm, 9cm, and 10cm, respectively. I didn't change the other dimensions.
Große Schneeflocke mit Aufhänger für euer Fenster oder Wand. Die tatsächliche Größe seht ihr auf dem Bild. Die erste Schicht am besten sehr langsam drucken, damit alle Rundungen ordentlich am Druckbett haften. Meine Einstellungen (nur als…
Ein Leuchtturm mit ~28cm Höhe zum partiellen kleben und/oder stecken. Zwei elektrische Teelichter passen hinein und etwas Küchengarn kann für die Absperrungen benutzt werden. Farblich kann er nach belieben gedruckt werden….leicht zu…
3D model of a Viking sword adorned with intricate ornaments, showcasing a blend of historical and artistic detail
Fishing lure / mold 18cm nymph for predator fishing 6mm screw hole Enjoy
I made this spacer tool to help install the excellent snap in Govee light holders from: https://www.printables.com/model/593227-govee-rgbic-led-permanent-outdoor-lighting-mountin This allows me to space them 8cm from the house, which is…
Kumihimo is a Japanese form of braid-making. Ribbons are made by interlacing strands. Kumi himo is Japanese for "gathered threads". This one was designed for thin yarn. If you want to use thicker wool -> adapt the OpenSCAD File
Here you have yet another droid out of the Star Wars universe. This is a 68cm filament print of a guardian droid “Dark Trooper” from the Star Wars cartoon series “Rebels”. The original model was designed by an artist on Fiverr for me.…
This is a polygon design plant pot with a saucer. The inner diameter is approximately 175mm and the height is about 170mm . It is quick to print as the outer shell is 1.2mm thick, requiring 3 perimeters with a 0.4mm nozzle and 2…
This is a refined and smaller Version from my Remix from the EggSpeaker. Including all sort of Files :-) You should be able to print it with less than 800 gramms or 265 meter (Ø1.75) of plastic including support material. In my opinion…
hélice 3 pales drone 8cm (3,15 inch)nécessite supports
Imprimé en PLA à 40% pour être sur de ne pas déformer le moule. Pour plus de détail en 0.12
Thanks to Just Joshi for this original part. The Shelf has a depth of 18cm. There are 2 variants in the width, one with 18cm and one with 20cm. Therefore it fits on all 3 Skadis models. For the 76cm Skadis board you take 2x 18cm + 2x…
Tested with 3 different EU power strips. The height of both strips is 40.5 mm. They should fit snugly and click into place clearly. I used the clips to screw strips under my desk. (Glue also works) I used the end piece to mount a strip…
UPDATE 17/02/2023 Added a sanding aid to sand the inner edges of the outer surface of the lampshade after the filling primer __________________________________________________________________________________________ UPDATE 18/02/2023…
Minimal remix of the ground hook by 3D_Onkel. Remodeled to be printed flat for optimal orientation of the layer lines against expected forces. Uses less than 50% of the original material. Safely anchors to the ground due to rehooks.…
!!! I FOUND NO WAY TO PRINT IT CLEAN AS MOLD! SO I DECIDED TO CREATE ONE WHICH CAN BE USED WITH A INNER SILICON MOLD. !!! You will find the new version here:…
Audio reel 7" - 3 part model, easy to print and glue toghether.
I needed the 5mm size one with just a *little* more height so I threw it in TinkerCAD and cut it up so I could add 3 mm with out affecting the geometry of the bottom or the lid slide part. Everything else is identical to the original.
Vánoční koule průměr 6 a 8cm s otvorem pro háček Christmas balls 6cm and 8cm with hook hole
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
This model was designed to raise the height of a Kallax-style unit by 18cm to allow for a robot vacuum and dock to fit neatly underneath. It comfortably provides sufficient clearance for a Roborock S8 dock. It comes with three holes per…
A modern and simple 13x18cm photo frame with the option of a standing mount or a wall mount. Easy one screw assembly (any pan head no. 2 or no. 3 screw 8-10mm long). The frame on the pictures was printed with 0.28mm layer height and 10%…
Intro This is a fun micro frisbee designed to be super compact and lightweight, yet it flies surprisingly well for its size . At only 18 cm in diameter, it’s perfect for printing on any 3D printer — even smaller ones like a Prusa Mini or…
Sliced the model to fit the printbed of 18x18x18cm. Remember to print the pin horizontally on the bed, otherwise it will be too weak and snap easily.
[Universal V dipole Antenna Hub] for m4 whip and BNC coax this is a simple, but extremely practical antenna system that is multiband capable. it enables you to adjust it to practically any frequency within its physical limit. should be…
A simple remix. Height increased to 8cm and 2 transom added for greater strength and a better final appearance.
a center marker for woodworking or any other ideas that you can think of! new and improved for precision and accuracy! Print Settings Printer Brand: FlashForge Printer: Adventurer 5M Rafts: No Supports: No Resolution: .20 Infill: 15%…
First of all: this is a remake of the amazing: https://www.thingiverse.com/thing:4817279 I first published it here: https://www.thingiverse.com/thing:4846512 I made the following changes: the table now is bigger : 28 cm of diameter I used…
I added spacers to a 4x5 Gridfinity Spacer to fit into a Bisley Style No Name Desk Cabinet with 23.5 x 38 cm drawers (inside Measure) You need two of those Grids to fill the drawer. My first model/remix so feedback is very welcome
Inlays for the Kuggis 18x26x8 storage box from IKEA The inlay rests on the lower wings from the Kuggis, leaving a bottom pocket for storage as well. Different division versions are available to suit your needs.
Stillness insert A remix of the Waveshare 7.5 e-ink display insert for Ikea Rodalm Frame that can hold the TRMNL 7.5" (OG) DIY Kit , using a slightly modified base plate from the Triangular Prism 3D Enclosure . Made for my project…
Card holder for Paleo cards. The base game includes 1-5 and A-J. The original model by Andun_HH did not fit on my PrusaMini print bed, so I changed it up (while also reducing overall volume and making labels easier to read): basic_1-5_A-J…
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
Easy to print token tray. Approx 8cm square and 1.5cm high.
Standardbilderformat meines Fotolieferanten. Ich habe in FreeCAD es neu designend und dabei gleichzeitig das Passepartout so angepasst, dass alle Abstände identisch sind. Der Zusammenbau ist einfach. Passepartout von hinten in den…
Obrázek upravený pomocí inkscape: Chase: https://coloringoo.com/printable-paw-patrol-chase-head-coloring-page/ Nastavení: 15% infill 2 perimetry pouze jeden perimetr na horní vrstvě (PrusaSlicer Expertní režim=> vrstvy a perimetry =>…
18cm wide spatula for wide prints. there is no logical reason for this to exist.
Holder for picture card clear cases Fits ~40 pieces With debossed I Love Kpop theme
This is a custom remix from https://www.thingiverse.com/thing:2896301 I've redesigned the whole model in fusion360 to fit for this parts: https://www.visaton.de/de/produkte/chassiszubehoer/breitband-systeme/b-80-8-ohm Found here:…
To secure the feets in place you can use hot glue in the grooves on the top
Cortador de galletas logo batman 8cm
The sizes are approximately! Do you need other sizes? Contact us before payment! Please give us a ❤ if you liked the model, so we'll continue uploading interesting .STL! Ask us for custom designs! We are located in Buenos Aires,…
Material sparende Rampe für die Türschwelle
This is my try to create 18cm/7inch audio tape reels. There are stl-files attache for different designs (0,2,7). The 3mf-files are a selection of designs i put together on two print plates each. If you want to print the non preconverted…
Diffuser that snugly fit over a 8x8 LED floodlight making the light much more evenly distributed. No glue required. The walls are 1.2mm, the flat surface is 0.48mm thick, enough for 2 layers of 0.24mm The inside dimension is a square with…
A cookie-cutter for 18cm diameter ceramic flower with 6 petals
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "Trident or a Star" and a diameter of 18 cm. I would like to point out that this is a…
Added a slot for US currency, and maybe others. Remixed from https://www.thingiverse.com/thing:3198221 where you can find the rest of the model. Category: Models
Cortador de galletas de curz 8cm
a decorative support for my bathroom - total height 58 cm
Un petit pied de 18cm pour réaliser par exemple une tablette de canapé pour l'ordi. Impression en PLA ou PETG à votre guise en 0,2mm par exemple avec un peu de remplissage pour la solidité (30-40%). Attention , le pied n'est pas…
You'll need the two files - the inner-tabs STL file and the outer-tabs STL file. These two pieces latch together in a bayonet-style mating to form the reel. Haven't tried with other versions of the reel-less filament products, but this…
I found Element System 32 in Bauhaus, but they are not carrying it anymore, and I couldn't find an 8cm shelf bracket anywhere, so I made this in Plasticity. It's a tight fit, but printed with 6 walls it feels like it's probably strong…
https://github.com/ntchris/voron_mod_super_diy/tree/main/ercf_v2/filament_tension_sensor_hall Inspired by Annex-Engineering's Belay sensor module https://github.com/Annex-Engineering/Belay Inspired by jmillerfo 's Voron ERCF Filament…
I needed an airbrush turntable for a project. Even though relatively lightweight, I wanted more stability for the platform so used two 608 bearings instead of just one. I also did not want to worry about getting an exact fit and fine…
Print this and a mirror version. Printed with PETG and 3 perimeters.
Imprimido con: Prusament PLA Marble Grey
For restaurant-style service, use this Pastry Ring to assemble your side dishes and starters. This Ø 8 cm x H 4 cm Pastry Ring is sturdy and practical. PLA + Unsupported Layer height 0.2mm Thickness of bottom top: 0.8 Filling : 30…
這是一款為水耕系統設計的 極簡風定植籃 ，以乾淨俐落的結構，提供根系最大的生長空間。 整體採用高透通設計，側邊大面積開孔，有助於： 根系自然伸展、不纏繞 提升水流循環與含氧量 降低積水與悶根風險 適用於 3.3cm～3.8cm 直徑開口 ，常見於 DIY 水耕箱、育苗盤、3D列印水耕盆栽等系統。 簡約外型不搶植物視覺，特別適合生菜、香草、草莓等小型作物。 This minimalist hydroponic net cup is designed to provide a…
Hi it's Hanjo from BODY3D ! It's a simple soap holder ! Creality CR-10 VS Dagoma Neva Watch my video : https://www.youtube.com/watch?v=tAJRRxMiPCI&t=611s Follow me on : YouTube :…
This is a holder for two Peugeot spice mills. Intended for the use of two mills in the 18cm Version. It will probably also fit any other brand of spice mills up to a diameter of 60mm. two Versions, with and without my Logo
The insert is suitable for the Doppler Umbrella stand with a pole diameter of 40cm (15,7") or 28cm (11"). https://dopplerschirme.com/de/85897axt-active-granitsockel-trolley-70.html…
The Spot To Place The Sticker Does Not Align With How Much Filament You Have Left(For Everything Other Than V4) A custom filament spool Works the same way the reusable bambulab ones do and should work with them too however this is built…
Los agujeros para los tornillos los tuve que agrandar con un destornillador, ya que aun no controlo bien las medias, por lo demás cumple con su función Imprimido con Creality Ender 3 V3 SE en PLA
Info: simple 18cm hanger for metallic hole wall (1cm square holes) 40/50%+ infill, 3 perimeters I have used PLA (so it is not that flexible) no supports
Baby Hanger remix with smaller hook 28cm lenght fits MK4
This custom battery adapter is designed for the KIEV 88CM TTL viewfinder, providing a modern solution to replace the discontinued 6V battery. Built with precision and compatibility in mind, the adapter ensures seamless functionality of…
This is a replacement Spool holder for the Creator 5. It adds about 1 cm of length, allowing you to use spools of larger size. Two variants are included — one for the left side and one for the right side. You can omit one of them if you…
Made a small and later a big version. Came out very nice. Lamp created with https://lithophanemaker.com/Lithophane%20Sphere.html Print with more than 90% inflill and 0.1 layer height for maximum quality. No supports needed. Print with…
Sophie – Elegance in Every Curve Transform your space with Sophie – a beautifully designed straight ribbed vase that combines functionality and style. Optimized for quick and easy 3D printing, this model is perfect for showcasing your…
Top edge is 0.5mm thick. Circle cutter to cut pie dough.
8cm diameter ball for grip/hanging training. “Hole in the ball ;)” is 7mm wide - i used 5mm rope to hang the ball. I've printed mine with PETG
Pour ranger différents types de papiers, post-its, liste de courses et notes qui trainent… Imprimé en 0.16mm.
First of all: this is a remake of the amazing: https://www.thingiverse.com/thing:4817279 I made the following changes: the table now is bigger : 28 cm of diameter I used an ESP32 with WIFI I made it an Access Point you can access via AP…
a simple, 18cm embroidery hoop - to hold fabric while you darn/embroider it, etc. It may seem thin, but it works very well, take it from me as I have used it several times on thick work trousers, tightening it almost all the way and it…
Auf Anweisung der Frau passend in den Badschrank designed. PLA, 20%, 3 Wände
Übertopf Durchmesser 10cm, Höhe 8cm mit Untersetzer PETG 0,2mm ohne Stützen
This is a modular, industrial-style desktop mount designed specifically for 8cm speaker units . By embracing an "Open-Air" (enclosure-less) design, this kit allows you to enjoy the direct, natural sound characteristic of full-range…
Here's a straightforward 3D printable wall frame tailored for 10cm x 8cm pictures. Its minimalist design ensures your photos are displayed with simplicity and elegance in any setting. Print Configuration: Use a brim for stability during…
Simple remix of Silly's longer rifled MXL Titan barrel. I wanted a shorter one for 8cm MXL darts as they perform better. This also conveniently made the size of the barrel the same as the rest.
Eine kleine Box für Kreidestücke von einer größe 1x8cm.
Please like before downloading the model . Thank you so much for your support ✌ Follow me on Instagram @artmancults for more models, prints and updates: https://www.instagram.com/artmancults/ bait model and bait form for fishing for…
Nocing really fancy, I needed a frame reducer for my 8x10inch camera to get 13x18cm pictures. So I designed it in Fusion 360 and here is the result. I'm making wetplates by the way, so I don't think this could fit for film unless you make…
This plate is ideal for vases / pots with a 8cm (80mm) bottom diameter. Scale it up for bigger pots: 200% - 16cm bottom diameter 150% - 12cm bottom diameter You get the jist... Category: Outdoor & Garden
This is a small wrist rest for 38 cm wide keyboards. The wrist rests sold are too long in depth. However, this one is 50mm deep, compact, easy to use, and perfect for people with small hands. Moreover, the surface is soft when output in…
Description: My partner's son needs a low table for his PC mouse and keyboard, I decided to print one for him starting from a shelf bought at DIY measuring 30x60x1.8cm. The structure is simple to assemble, the crosspieces, the side…
Thanks to Just Joshi for this original part. The Shelf has a depth of 36.5cm. There are 2 variants in the width, one with 18cm and one with 20cm. Therefore it fits on all 3 Skadis models. !!! Attention: You need a big printbed to print…
Sick of spilling rice or pasta when filling your measuring cup for your rice cooker? Use this funnel, just put it on top of the 8cm diameter cup (it has a handy little rim chamfer so it'll hold there) and pour your heart/rice out of the…
Spool Divider for 10cm and 8cm core diameter spools. Use double sided tape to glue the dividers to the spool core to avaoid the dividers falling off when the spool becomes empty. Tested with Prusament paper core and Geetech spools. One…
Pannelli forati per sospensione utensili da lavoro. Composizione da 85cmx48cm. @pannelli da 20cmx20cm @pannelli da 20cmx8cm @pannelli da 20cmx5cm @più staffette per l'assemblaggio a muro e tra i vari pannelli. I fori dove mettere i ganci…
