1 / 4
Fanttik X200 (V10) Vacuum Cleaner Exhaust Deflector — zdjęcie 1
1 / 4

Fanttik X200 (V10) Vacuum Cleaner Exhaust Deflector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple adapter that deflects exhaust air flow

Ocena
0 / 5
Polubienia
3
Pobrania
35
Wydruki
0
Wyświetlenia
174
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My 3-year-old grandson loves using the new Fanttik X200, but he wasn't a fan of the exhaust air blowing directly into his face. I designed this simple adapter to deflect the air stream down and to the right.

The deflector can be rotated in 120° increments, so you can point the air wherever it's most convenient. I have provided the .STL for general use, but I highly recommend using the included .3MF file. It contains a custom modifier for reduced print speed at the top of the grill to ensure the best results

Print Settings:

  • Printer: Prusa Core One (or any FDM printer)

  • Filament: PLA

  • Nozzle: 0.4 mm

  • Layer Height: 0.15 mm (variable layer height)

  • Perimeters: 3

  • Infill: 15%

Special Instructions

The included .3mf file features a manual speed reduction (down to 20 mm/s) for the height range between 25 mm and 36.5 mm. This is intentional: it ensures the thin "grill fingers" (slot dividers) print cleanly without wobbling or vibrating due to the printer's movement.

Happy printing!

Tagi