50mm Hose Adapter for Bosch Circular Saw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to allow a 50mm hose to be connected to the Bosch Universal Circ 18v-53 Saw, typically for use with a vacuum
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Share Alike
An adapter to allow a 50mm hose to be connected to the Bosch Universal Circ 18v-53 Saw.
The saw end has a taper for a good push fit into the saw.
The hose end has ridges to keep the hose connected. Is a decent push fit for the hose I use, but you might want to use hose clips or cable ties if loose.
I printed in Elegoo PETG Pro (as pictured). PLA may work, but I feel PETG might have a little more squish to help the push fit into the saw.
STEP file uploaded in addition to STL for easier altering where needed.