"Core One L" wire harness protector and Exhaust Fan Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevents the cable harness snagging on the fan; also mounts DET-Man's exhaust cover on the C1L.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 240
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
These brackets prevent the cable harness from snagging on the left corner behind the fan. They also serve as a mounting solution for the C1L. Unlike the C1, the C1L has no threaded inserts in the rear plate. The fans are secured with nylon rivets instead of screws.
The brackets are fastened to DET-Man’s fan grille using M3x10 screws. Heat-set inserts must be installed in the brackets. The fans are then mounted to the rear plate using the original nylon rivets.
Also note that the lowest cable tie should not be installed, otherwise the fan cables may interfere with the cable channel.
I deliberately chose not to simply add nuts on the rear side. The holes are 4.3 mm, which is too large for M3 screws. Adding more printed parts to compensate would take up too much space on the back and would likely make installing the filter option unnecessarily difficult.
BOM:
- 4x M3x10 screws
- 4x M3x5x4 Voron like heat inserts
Happy printing!