Slip On Round Ball Furniture Corner Guard Set TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ball slip on corner cover guards. Designed to fit rail thicknesses of 15mm, 18mm, or 21mm. Plus a 31mm x 25mm version.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A slip on top ball cover guard I originally designed for use on a child chair back top. I designed multiple versions with a few thickness options. The "Type A" version was designed for a vertical orientation placement, the "Type B" has the corner at a 45 degree angle. I imagine these can be used in many places as corner protection for rail/furniture corners. There are seven models in this set:
Type A 15.5mm wide internal cut
Type A 18.5mm wide internal cut
Type A 21.5mm wide internal cut
Type B 15.5mm wide internal cut
Type B 18.5mm wide internal cut
Type B 21.5mm wide internal cut
Special version with dimensions of the inner rectangular hole of 31.5mm x 25.5mm with a side hole cut of 18.5mm wide.
Prints without supports and possible to scale to desired size and proportions. Best printed in TPU with suggested 12% infill.
Want a different style corner guard, check out my other models: