Miriam / Virgin Mary Figurine / Statuette (FDM Friendly / A1 mini compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Figurine / statuette, prepared for reliable FDM printing (0.4 mm) with “safe” settings across many printers
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Files
STL – universal (any slicer/printer)
3MF (Bambu/Orca) – ready-to-print starter profile (0.4 / 0.20 / tree supports)
Tools used
Created with MakerWorld-printU (https://makerworld.com/makerlab/printU)
Compatibility & scale
100% scale is fine for most printers.
Recommended FDM settings
Nozzle: 0.4 mm
Layer height: 0.16 mm (faster: 0.20 mm)
Material: PLA
Infill: 10–15% (Gyroid/Lightning works well)
Walls: 2 (for a sturdier base: 3)
Supports: ON – Tree supports, Touching build plate
Brim: 5–8 mm (tall print → better stability)
Supports note
I recommend keeping supports build-plate only and avoiding supports on the face. If your slicer places supports on eyes/face, use “paint supports” to block them.
Makes wanted (thank you!)
I don’t have a printer yet, so I’m collecting community test prints to refine the final release (mainly supports + face detail).
If you print it, please post a Make + 1–3 photos and include:
printer
material
layer height
supports (yes/no) + type
Most helpful photos:
front, 2) back, 3) face close-up, 4) bottom of the base
I’ll feature the best prints in a “Community Prints” section (with credit).
Changelog
v0.9 – initial release + community test prints (Makes)