Misery Hide Plates for Core One Side Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plates to glue on your Core One Side Storage (especially for PLA). Improve fit, hides joints and mitigates PLA creep.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These plates adds an nice aesthetic touch to your Core One Side Storage (COSS).
Plus, if you made the beginner mistake to print it in PLA (like I did), and have trays heavily loaded, after several months, middle trays tend to set the walls aside due to PLA poor creep properties : Trays do not fit well anymore and they constantly fall. This is mitigated with those plates as they constrains walls in the Core One side panel.
Last but not least : If you made some mess with magnets mounting, or had to print the split version, these plates will hide your mess and print joints.
A Prusa Slicer projet is included with specific tuning to have them at the right size with apparent honeycomb on top (see photos) : just upload and print.