Desiccant Regeneration Basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desiccant Regeneration Basket for Sunlu FilaDryer S2
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This drybox/drybasket is made to regenerate silica/desiccant with grain size > 1 mm in a Sunlu FilaDryer S2. All parts were printed using extrudr DuraPro ASA filament with 260° nozzle temp, 100° bed temp and 60° chamber temp on a K2 plus with smooth build plate.
For assembly you will need 2 M3x10 flat head int hexagon screws (with heat inserts in the distance roll) or 2 M3x15 flat cross-head selfcutting screwss and 26 M3x20 flat cross-head selfcutting screws or you use just industrial super glew and fix the parts together until dry.
Be adviced to use ASA/ABS for temperatures > 65 deg. to avoid PETG material deformation. It is not recommended to use PLA because of 49+ deg. material deformation.
Temperature in the Sunlu S2 and regeneration time depends on desiccant brand and grain size.
View also my Sunlu Filadryer S2 stand at:
https://www.printables.com/model/1626657-sunlu-filadryer-s2-stand