E3D Hemera XS integrated in FLSUN V400
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets to integrate the Hemera XS in the FLSUN V400
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Brackets including a strain relief and hole for a DS18B20 Temperature Sensor, to measure the temp of the extruder motor because of heated chamber. Fan duct also available using a hose. Also with deepening for the BTT ADXL Sensor, mounted with thread inserts.
You will have to cut out the middle section of the effector plate and shorten the mount for the bed level switch.
The orientation where to drill the threads for the brackets is followed by the form of the brackets and the effector plate, as shown on the picture.
Please let me know if you have a better idea for the fan duct. Also I didnt find space to mount a proper fan, thats why i will use a hose and mount the fan somewhere else.
I used Siraya tech PPA-CF with a 0,6mm high temp nozzle.