Liczymy pasujące modele…
I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
Intro XXXS super-mini emergency whistle for your keyring! Only 32mm in size. Only 4min print time. SMALL but LOUD! Print a few of them and give them to your friends as emergency whistle. Why you'll love it? Very small - only 32mm Quick…
Intro A super-mini tool designed to hold standard hex bits with exceptional grip and control. Its compact size makes it perfect for tight spaces, keychains, or everyday carry in your toolbox — yet it still offers a confident, textured…
This is a remix of a great scraper model with printables logo.
Lukisegler-NG XS Span: approx. 900 mm Body length: approx. 500 mm Take-off weight (LW-PLA): approx. 100 g Controls: elevator / aileron Center of gravity: 7 mm behind the profile nose (next to the fuselage) Rudder deflections: aileron…
Features: Swappable blade to avoid having to print a whole HexScraper when yours is worn out. Hexagon with screw threads to secure a 8x2.7mm magnet. Hollow Hexagons for decoration. 2 Types of blades included: 2 Piece and Single Piece…
D: Schutzhülle für das Apple iPhone XS und iPhone XS MAX. Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. E: Safty case for Apple iPhone XS and iPhone XS MAX. I printed the case in PLA…
Intro A tiny but incredibly handy bit driver designed to go everywhere with you. This latest V2 update improves grip and usability while keeping the tool ultra-compact . Whether you’re fixing small gadgets, tightening electronics, or just…
I was lucky enough to get an xbox Series X at launch but like most TV stands mine has shelves that don’t accommodate the console standing in its natural position. I didn’t want to sit it on the floor hoovering up dust, so designed and 3D…
Eine weiter Hülle nur diesmal passend für das iPhone X/XS. Auf der Kamera Seite steht die Hülle zum schütz über. Auf der Display-Seite sind wir mit dem Display bündig (Achtung Kratzer Gefahr). Die meisten nutzen aber meist sowieso ein…
Inspired by the HexScraper and designed for the pocket tools challenge. With this pint-sized pocket pal packed in the pocket of your poncho, you can plunder PLA any place! Particularly if you are prone to placing piles of plastic pocket…
Please compare the first photo with your slicer before printing. Make sure that your scraper head underside looks like photo 3. If it takes longer than 36 minutes to print, then something is wrong with the slicer settings. Optimized…
Paint on supports on the front edge, the rest of the model does not need supports. Orient the model so that the tab on the top the hexagon is facing up. The tab has been removed from the bottom of the model so that it sits flat on the…
SRAM eTap/AXS Cover for Battery Block | Front/Rear Derailleur and Dropper Post Print in PLA 0.4 mm Nozzle 0.2mm Layerhight. Supports Yes
V2, and a much needed upgrade of the original barrel collet system I made for the Xshot Longshot, using the same internal barrel collet as the Unicorn Wings Kit that can be found here: LINK . This still has the version of the collet that…
Attaches onto the side rails of the ragefire, holds the original belt or various delinking belts available on the internet, attaches without hardware
I remixed the HexScraper - Printbed scraper from visle to add a magnet so I could hang it from my X1 Carbon. The STL is designed for a tight fit using an 8mm x 3mm magnet but I have included a parameterized Fusion 360 file if you want to…
Clean bed. Fresh start. The Minimalistic HexScraper is a compact, one-piece scraper for removing filament remnants from your 3D printer’s build plate. A central grip keeps the tool close to your hand, while the hexagonal shape provides…
Caddy for a Shark Flexstyle and accessories. First time designing anything from scratch.
Meine zweite Version einer Hülle für das Iphone X/XS. Diese ist nun nochmal Dünner und besteht aus 2 Teilen die ineinander gelegt werden. Durch die 45 Grad liegen die beiden Teile gut ineinander und halten auch ohne geklebt zu werden…
I wanted to store the Hex-Scraper on my Mini but it was to wide to fit without interfering with the filament hose. So I remixed this smaller version. The hook I used can be found here:…
I was impressed by the concept of RostaP 's storage wall. It is super versatile and it is extremly easy to design your own addons. However, I found the actural panel design a bit to unspectacular. So I came up with the idea to repeat the…
To use, print both the left and right halves of either the “Low Profile” or the “Flared" versions. Both of these use the internals from the included X-Shot half length adapter, and both will require some cutting of the adapters…
Hey hey fellow Nerfers! I present to you the Pick-Rocket 2 (or the “Tactical Brick”, as I like to call it). This is a reshell of the Xshot Micro 1.0 (the previous version). You can use it as its own blaster or as attachment for your Nerfs…
Revo Hemera XS is 92g lighter and 11mm shorter than classic Hemera. A custom stepper motor means it can move faster on your 3D printer’s motion system with less inertia than classic Hemera, reducing print artefacts such as ghosting. Its…
Update 9/7/25: Added a V2 version with improved grip pattern and tweaked greebling for multi-color printing. This remix has the same install instructions as the original model. Just unscrew the bottom two screws of the magwell, slightly…
Handguard/barrel shroud for the Xshot Motorized Piston Pump. Available in Keymod or MLOK. Also has an integrated QD sling mount. Friction fit- no hardware required.
If you own more than one bike with a SRAM AXS groupset, you may have accumulated a few of the single battery chargers (EP-EAC-BC-A1) like this one: The individual chargers are very light and the cables tend to cause them to slide around…
Both parts are designed to be printed with no supports, Use a 4-40 x 3/8in screw in the front if the picc lock isn't staying in place. You will need to prime the blaster before installing. Don't have a printer? Order from OOD! Affiliate…
This a remix of Machvolum's model which comes from visle's original model. This version add's rounded corners to Machvolum's model. The theory is that on sharp angles (such as 90 degree corners or similar) the extruded filament tends to…
This is a remix of the Bufallo e-NABLE Crisis Mask V1 optimized for filter sizes in Brazil. Works pretty well with the 1.5 mm wall thickness implemented in these models here. Five different sizes - XS, S, M, L XL The insert for the filter…
Print with no supports, pull out the stock barrel and throw this one in. Don't have a printer? Order from OOD! Affiliate link !
Enclosure for PCBv4.xSTD for AgOpenGPS. Enclosure has 2 removable sides, PCB can be inserted from both. This version is fully 3d printable. You can choose from many face and back plates available. But F9P users can only connect antenna…
This is not my design, this is a copy of https://www.thingiverse.com/thing:4091776 that I wanted to migrate to Printables, and I've also designed and included a Hemera XS mount to go along with it. Use a piece of filament to secure the…
This is a scar for the Xshot Longshot blaster. The stock scar was non functional. 6/20/23 Working on updated version ** added new V2 improved rifling and less FPS drop ** 6/27/23 Adding Version for 16mm replacement barrels *** added V3…
I downloaded and printed the sd card holder from "mmurase00". Then I figured out that the print can cause that sd card (micro and general sd as well) could either fall out of the slot or you have so much resistance that you run a high…
A HemeraXS Revo Cooler design. WINSINN 4010 blower fan is used. You need a 1mm plate of steel in between the Hemera motor and the fan as the motor magnets effect the fan. I just double sided sticky taped mine to the fan. Own design but…
I created this since there were not a lot, if any, cheek rests for LEFTYs... so i made my own!! My Stock Lock & Cheek Rest is a 2-Piece design. This allows for two things, (i) you can just use the Stock Lock by itself if you don't need…
Update 8/4/25: Added a couple more versions with slightly adjusted openings if the original is too tight or loose for you. Alter the scale in your slicer if you need further adjustment. Easy to print shroud that friction fits over the…
After a ride in which I lost power to both my seat dropper and derailleur as I hadn't charged them, I went looking for a solution - to both reminding me to charge, and also reminding me not to forget batteries on my next ride. I…
I purchased a used 997.1 this year and found the sound quality severely lacking after upgrading the old aftermarket head unit. Turns out the factory amp (ASK) had failed along with the stock woofers in the front doors. The factory woofers…
A scraper to clean the print bed of your printer with a modular blade, so it can be replaced when washed off! Changelog V2 improves dove tail (non retro-compatible) and adds hexagon pattern on the joint. V1 first version with a dove tail…
This design is meant to be a press fit into the trapezoidal cutouts in the rails of the Xshot Longshot. This uses 2x toy screws (the normal screws that Nerf, Dartzone, and Xshot use to keep their blasters together). There are a ton of…
Hey, I was just trying tolerances with hexagon, but I found out I really like how it looks, so i printed more hexagons and I think it looks great. Of course all credit to author of HexScraper, I just made little modification.
A collection of covers and protectors for REV Robotics MAXSwerve that 2811 has been using on our modules. The Gear Dust Cover has grease holes so you don't have to disassemble the module to regrease. If you use Fusion 360 you can open the…
Ich habe mich mal an eine Handyhülle gewagt. Benutze sie selbst und mein Handy hat schon einige Stürze damit überlebt. Gedruckt habe ich mit TPU A95 und Supports.
This is an XS version of the tripod I re-designed inspired by Kernel770's tripod. It was primarily designed for those with really small 3.5in³ printers and has shorter legs. In all other aspects it is identical to my larger tripod. It can…
This is a remix from thing https://www.thingiverse.com/thing:1930492 I remixed it to fit my Galaxy S20 with a case on. It also fits an iPhone XS with a case on. The phone gap is now approx. 81mm x 13mm. It works really well. Print…
Designed to hold the SRAM AXS charger and 3 batteries or battery covers
A comfort grip (for when the device is opened/in play) and a standing case (for when the clamshell is closed) for the iconic Anbernic RG35XX SP. It has access to all the ports on the side and bottom of the device. It can be printed with…
986 GT3 Center Console Delete The split file is to fit on a Prusa Mk3s Recommend using PETG Must remove orange tabs on the bracket to mount Left enough room to upholster part Fit as one part on Prusa XL. Used PETG with organic supports.…
Holder mounting festool CXS and TXS under cabinets or other places.
Update --------- BCAR Shroud 1.1 ------> X-Shot MPP (or LONGSHOT 2.0 with EXTENDED custom barrels) + optional Barrel Color Sleeve for the MPP Wrap two to three layers of e-tape around the narrower rear section of the BCAR and insert it…
Short battery stock for the Piston Pump combining the short simple design by ZafC with the utilisation of the original battery door by N8thin. Although this is a remix the battery stock was completely rebuilt from scratch using the two…
Wanted to use a 4" Dayton Audio Full range speaker that i was familiar with. sounds great in the car. can use M4 screws directly into the plastic or use the version with M8 thread adapter version to increase mounting strength. Update…
Bottom is flat. Case is tested. Best printed slowly in TPU.
Spring spacers for your MPP. Available in 2.5mm-10mm sizes, can technically stack them but I don't recommend it. Start small and go from there, I don't know what the max safe precompression on the stock spring is. Print something like…
Sometimes caliper pistons get stuck due to dust and dirt. For cleaning you need to push them out. If you do it wrong they fall out and you loose your breaking fluid and need to bleed the whole system. With this design you can push out one…
Spring spacer for the XLS. Adds ~10mm of precompression 7.5mm, 12.5mm and 15mm sizes also available. Slight edge on the outer end to help the spring stay aligned. Highly recommend you print this in 100% infill for durability reasons. Not…
This is an adapter made to suck dust from my Makita DHS680 circular saw with a shop vacuum. opening is 38mm in diameter. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: low Infill: 25%…
I designed this neat stand in which you can mount the IKEA Rallen wireless charger. Standard size: https://www.thingiverse.com/thing:3068268 NEW - XL Version: https://www.thingiverse.com/thing:3141797 Flat version:…
project based on research from me (@V_saggiomo) and Benedict Diederich (@beniroquai) *update April 2023 - we are testing external (battery-powered) LED. These LEDs are usually used for decorations, can be on for 2 weeks, and are quite…
My Boom grip, now remixed for the X-Shot Longshot. New this iteration: knurling. Neat. Uses one M5 bolt (either 30 or 35mm I think) and one M5 nut. Designed to be printed with the front end up - it'll bridge over the picatinny's end, no…
3D model of the Porsche Boxster 986 and probably 911 996 frunk trim cover fastener. Porsche part # 999 590 036 40. Most of mine were broken or missing, so I remodeled them in CAD and printed my own rather than giving more money to the…
I couldn't find a axs battery cover that worked for both road bikes, gravel bikes, and mountain bikes so I made my own. hopefully this helps someone. tolerances are tight.
The Anbernic RG35XXSP is a retro handheld emulation game console that runs on Linux. It's design is boxy and this is for people who want a little bit more grip to the console, but still keep the slim and portable nature of the console. I…
If you are like me and absolutely despise the exposed barrel on the end of the new XShot AEB, then this model is for you! I designed this barrel shroud to match the general aesthetic of the blaster, as well as add some extra rail space on…
clips on to my 2023 xsr700, i've included the fusion360 file, so you can adapt it
This is a 3D printable version of the 44T2216 hard drive caddy for IBM/Lenovo xSeries servers. It can hold a 2.5-inch SAS/SATA/SSD drive and fit into the server’s hot swap bay. It has four screw holes for securing the drive and a handle…
Print facing up, 3 walls, 15% gyroid, supports ideal but not needed. The L and XL need to be printed vertically to fit on the build plate to fit. I'm currently working on the Giga Box which has a goal of 200 rounds with cardboard walls…
Update 7/31/25: Added a closed version. I like to see the inner workings of a blaster so I designed this open jam door. No need to disassemble the blaster. Simply snap in place and secure with the original screw. Models are print oriented…
Porsche Boxster 987 convertible top transmission worm gears occasionally break due to age and/or excessive strain due to malfunctions. I have designed a replacement. Left and right gears are slightly different. Mirroring one gear in the…
Lukisegler XXS 3d-printed free-flight glider. Printed in LW-PLA. Reinforcement for the fuselage and main spar printed in regular PLA. Wingspan: 400mm Length: 260mm Weight: 18g Additional parts: 1x M3 x 20 screw 5-6x M3 nut 4x M4 nut.…
This is the barrel shroud by High Country Blasters, now logoless and with added tabs for a cleaner appearance. I printed mine with 4 walls and 15% gyroid infill. Printed at a 45° angle with the blaster-interfacing end in the air. Use…
Five sizes of easy center finders. Easy to print, easy to use. No support needed. Designed for Pica Dry pen, but usable for classic pen too. Dimension between legs: XS-1,5cm S- 3cm M- 5cm L- 9cm XL- 14cm
If you've got a set of wheels that have somehow lost their centerpiece or the plastic tabs have broken off, then this Porsche Wheel Center Cap is a perfect replacement; Print as is or customize it with your own logo/text. It has a 77mm…
The windshield/wiper cowl on the Porsche Boxster (986) are notoriously prone to breaking. It's possible this may work for the 996 911 as well. When this happens the ends become loose and flap around and the cowl no longer makes a good…
Stackable hexagon storage box V2 Large A model with supports for the handles is provided because all printers cant handle the long bridge for the handles. The Bambulabs P1P could handle the handle bridge without problem but my V400…
A simple tool to help assembly and disassembly SRAM Rival/Apex/Force AXS Power Meter (QUARQ) from the crank. 2026-FEB-14 Update: V2 Release: The updated model features an improved fit and an additional lever function, allowing you to pry…
split the design to make it printable on my ender3 pro
Microserver Gen8 SSD bracket for four SSD's I've created this bracket based on thing:1279920 from Oliver Oswald . I initially had above printed in 2017, but the moment i got it i was displeased with it because of how it was designed. It…
I broke the bottom button off my Sram AXS Ultimate shifter pod right before I'm supposed to bring my bike on vcay to Whistler. I tried looking around the web, calling the LBS's and NOBODY has them! Lame. Apparently the part is too new and…
This is a remix from https://www.thingiverse.com/thing:5328833 for the iPhone 11. This version doesn't have the bevels to avoid it being too bulky. Make sure to print with the top of the case facing up Use A Raft (Just on the outside…
All the Dolce Gusto capsule trays I found online have a different shape than mine (Piccolo XS), so I created a faithful copy of the actual tray. The file contains two versions, one has a rim at the top, like the original Dolce Gusto…
osVAC Connector for my Makita MAKITA DHS680 (US: MAKITA XSH03). It is a remake/mix to fit Makita and the osVAC Connectors. Update 2022/05/29 V5 More Material for the screw, because i've cracked it after a few uses with a long hose of my…
Converts a 1xSSD (or any 2.5") mount into a 6xSSD bracket, with multiple mounting options. If your case has 4 screw holes used to mount an SSD (flat orientation), this bracket should work for you. Multiple mounting options: Flat…
Gridfinity holder for the HexScraper by visle and Bambu Lab Scraper Includes glue fit 6x2mm magnet and screw holes Made with the Gridfinity Fusion 360 Addon By Le0Michine
Easy to assemble box for 4x SSD and Rpi4B. It can serve as a home NAS server. Passive cooling.
Press fit PCAR for Xshot Longshot, using Thanhtacles 's trivicus 1.0. It fits the lines of the blaster well.
Trichter um an der Yamaha XS 650 das Motoröl einzufüllen. Version v1 ohne Nase; Version v2 mit Nase um an den originalen Mikuni Vergasern zentriert werden zu können. Gedruckt mit vier Perimeter ohne Stützmaterial. Probedrucke wurden mit…
Trio Dock is a combined charger dock for iPhone X, Apple Watch and the AirPods case. Perfect for nightstands! The iPhone indentation is somewhat enlarged to allow for use with cases. It probably also works okay with iPhone 8. The watch…
Makita XSS02 18v Circular Saw Mount for IKEA SKÅDIS System Influenced by David Lane's Ryobi saw holder/mount . This is a Makita XSS02 18v Circular Saw Mount that attaches to the SKÅDIS pegboard with printed M2.5 T-Nuts from 6d6178 . (See…
Noticed that after installed Sprite direct extruder, cables are squeezed between extruder and z-axis profiles while moving on y-axis to its maximum. Designed cable holder that can be screw in original engine holes by screws from set.
Introduction A replacement frontend for the XShot Motorized Piston Pump blaster. This shroud replaces the stock front orange piece (and its collet). It uses the tension-band barrel retention system I've been using on some of my personal…
Crafted with precision and adjustability in mind, this adapter ensures a secure and ergonomic fit, allowing you to optimize your bike's cockpit for a cleaner, more efficient setup. No need for extra clamps or complicated adjustments – our…
Rear trunk emblem for a 986 Porsche Boxster
I couldn't find a really good stock to use with the excellent mounting point created by @LikeThePlatypus , eventually I stumbled on ReptilianSnail's stock for the parallax, which had the exact style I was looking for, but needed a bit of…
Made for need to scrape ice and also snow from car glass, but even works for outdoor stairs and stairs before entrance.I recommend it and tested being very sturdy and robust as well. Two sided function - one side is for scrapping and…
These files are not to be sold without my permission. I designed a barrel collet compatible with the Zuru XShot Pro Fury-X, allowing you to use custom barrels with a 16mm outer diameter that are longer than the original stock barrel. To…
These tiny print beds are for the Tiny Prusa available here: https://www.prusaprinters.org/prints/146-tiny-prusa-i3-printer by Dominik Císař. I recommend you use my gcode made for the Mk3S but should also work on the Mk3. If you don't use…
