Microserver Gen8 SSD bracket (4xSSD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on Thingiverse thing #1279920. Modified for improved breathing room for PSU and drawn some SSD stacks for it.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 317
- Wydruki
- 5
- Wyświetlenia
- 2422
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Microserver Gen8 SSD bracket for four SSD's
I've created this bracket based on thing:1279920 from Oliver Oswald.
I initially had above printed in 2017, but the moment i got it i was displeased with it because of how it was designed. It blocked ventilation holes of the PSU which i didn't like. Don't want it to catch fire. So the original version i used a Dremel to get it to fit properly but always wanted to redesign this thing. Queue 5 years later and i've finally managed to draw it properly.
Made with
Printed with
Used filament
Jupiter-series PLA 1.75mm gray
Rafts
No
Supports
No
Resolution
0.4mm
Additional settings
Flat surfaces were ironed
