1 / 2
Prusa Core One Exhaust Duct + Gasket Remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra fillet joint for strength + fitted gasket
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple remix of Mastakkos Core One Exhaust Duct. The original for me kept cracking at the junction between the cylinder and the flange face when removing the support material so I added a fillet around the joint for additional strength.
It's a bit different to the original as I had to reverse engineer it but the key dimensions are the same.
Now I've added a gasket to better seal the duct to the printer. Prints fine in TPU 95A.