1 / 16
Znc Aus - Functional Powerful Mag-Fed Nerf Pistol - Up To 200FPS - Cosmetic Part Variants — zdjęcie 1
1 / 16

Znc Aus - Functional Powerful Mag-Fed Nerf Pistol - Up To 200FPS - Cosmetic Part Variants

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Printable high-powered foam dart Nerf blaster pistol - up to 200 FPS muzzle velocity. How to build your own below ⬇

Ocena
5 / 5
Polubienia
1055
Pobrania
2106
Wydruki
4
Wyświetlenia
30 805
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Scroll down for firing demo video ⬇

Please leave a like and and consider posting a rating/make if you print and enjoy the project!

These are alternative cosmetic parts for the Znc Aus, with a more aggressive, tactical design. This listing contains all parts needed for the Znc Aus, including unchanged ones. These parts require no hardware changes and so use the original hardware kit for the Znc Aus. See here for the original Znc Aus model listing (check out all the amazing makes from everyone!).

About the Znc Aus blaster: The Znc Aus is a high-powered, mag fed (7-13 dart capacity) foam dart (Nerf) spring-powered blaster pistol in a compact size. It is capable of up to 200 feet-per-second muzzle velocity. It has 3 variants with different muzzle configurations. See further down for more information.

Everything You Need To Build Your Own

Firing Demo Video (original demo video with the original parts, I may make a new video with these parts new part variants at some point)
IMPORTANT NOTE - PRINT IN BRIGHT COLOURS

Due to it's design this blaster must be printed in bright colours and with an orange tip to differentiate it from a real firearm if you will be taking it anywhere where it could be visible to the public. This is mainly for your own safety, but also for the safety of everyone. This is your responsibility!

Also check out the Zc Aus and Zinc .50!

If you are interested in a more powerful (but larger) similar blaster, check out the Zinc .50. If you are interesting in a super compact pocket-sized (but less powerful) blaster, check out the Zc Aus.

Details

Textured Grip Note

The textured grip shown on the frame part in the images is done with fuzzy skin fill-painting. The grip sections are bordered by a small deboss which allows them to be easily fill-painted with the fuzzy skin fill-painting tool in the slicer. The settings used for fuzzy skin in the blasters in the images are 0.18 thickness and 0.25 point distance. There is also a 3MF file for Prusaslicer available which has the fuzzy skin already set up with these settings.

Mix and Match Parts

All of these new cosmetic part variants can be mixed and matched with the original assembly parts. For example, if the original trigger is preferred over the new thinner one, it can be used. See the original Znc Aus model listing.

Variants

A BCAR (Bearing Centering and Rifling) uses rings of flanged bearings with each at a slight angle to impart spin on the dart as it exits the barrel, vastly increasing accuracy with little effect on fps. The 3 muzzle options consist of different BCAR configurations:

  • Compact: No BCAR

  • Integrated BCAR: 6 bearing BCAR integrated into the front

  • External BCAR: Extended barrel and an external 12 bearing BCAR attachment

This model listing includes new cosmetic part variants for all blaster variants!

The extended barrel variant is the most accurate, and its longer barrel achieves a slightly higher fps on average than the other two, with the compromise of it being less wieldy (while looking cool). 

Znc Aus Additions and Changes vs Znc and Zinc

The Znc Aus is based on the Znc by Misplaced Moose, but it includes an external 'suppressor' BCAR variant, revised no-compromise hardware including a CNC plunger core, a 12.7mm ID aluminium chamfered lead-in barrel, slide magnets, double O-rings on all seals, and more. Nearly all parts have been remodeled with modifications for performance, ease of assembly, and aesthetics. See the images for more details. 

Assembly

Assembly is relatively straightforward. The assembly guide is detailed and includes troubleshooting steps for common issues. Unlike the original Zinc 2.0, no excessive sanding is required to get parts to fit and function, as long as the parts are printed accurately. A dimensionally accurate printer such as a Prusa or Bambu model is recommended for easy assembly. All information and tips on print settings, filament, and more can be found in the print and assembly guide.

Note

Like the Znc, the Znc Aus is an unofficial descendant of the Zinc 2.0 blaster by 118 Design.

Tagi