1 / 1
IKEA : Skadis Pegboard 5mm To 3mm Spacer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Save filament by printing a 3mm IKEA Skadis pegboard.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Downloadable IKEA SKADIS models are usually designed to fit the 5mm depth pegboard. For those that use the 3mm variant, models will feel loose.
The solution is easy, simple and low in filament use, my 5mm to 3mm spacer.
Included with the STL, is a 3MF file, used for my Flashforge AD5X print area, allowing 121 spacers to be printed, using 19g of filament and taking 1hr 24mins.
Using the spacer, means I can use my SKADIS items already printed, rather than send them to the filament rubbish pile.
