Fridge Water / Ice-maker hose bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fridge Water / Ice-maker hose bracket. Are you tired of the hose getting smashed behind the fridge?
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Fridge Water / Ice-maker hose bracket
Are you tired of the hose getting smashed behind the fridge?
I need a 10 foot hose to be able to pull out the fridge to work on it.
I was tired of the hose piling up on the floor behind and not being able to push the fridge back.
Could also be used on clothes washer and drier water hoses. Yes my drier has a water hookup for steam.
Printed in Black Fire Retardant PLA from kexcelled.
Printing Specs:
4 vertical walls
4 bottom layers
4 top layers
25% Gyroid infill
Print bed 60 deg C
Nozzle Temp 220 deg C
I used organic supports, but anything will work.
Screw holes in the parts are clearance holes for #8 screws. (0,200" dia clearance)