Prusa Core One - Creality Chamber Heater Side Panel Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added an additional cover along with bolt screw part joining for the already awesome part by @Cedric_9196.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 620
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Added an additional cover to clean up the look and have a surface to paste the controller board.
Made changes to the part splitting, using an M3 bolt and the existing bolt patterns to hold the parts together.
Printed in ASA for both mounting and cover. I recommend getting away with cheaper and lower heat-resistant material for the cover since it is a separate part and is insulated by air. ORR Just print with the nicest filament that your printer can print since its for yours eyes.
Might have a V2 to include cable tie spots/ cable management and remote holder in the future. Enjoy for now.