Meanwell LRS-350 PSU Fan Baffle with Prusa Research Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a noise mitigating fan shroud for the Meanwell LRS-350 PSU. It has been adorned with Prusa's logo.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 79
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I don't yet own a Prusa, but it's been brought to my attention that some Prusa printers in the wild are using the Meanwell LRS-350 24v PSU.
If you own a Prusa machine that has a LRS-350 power supply, and would like to quiet its cooling fan down, redirect air, or prevent debris from entering the PSU through the open grill, you might give this one a try.
As I don't yet own a Prusa, I'm unable to take photo's of this installed.
I print this as oriented in the STL file, with normal supports "to buildplate only". On a machine that's tuned for bridging, it will probably print lovely without supports, however, the supports come off for me pretty easily in a single piece, so I never bothered to chance printing it without supports.
Cipher66 was kind enough to allow me to publish the photo's of his make with this model to better illustrate how the completed installation should appear. The images here are his with the model installed on his Prusa MK3s.