Opus BT-C3100 Tilt Holder – Multiboard and Screw Versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight tilted holder for Opus BT-C3100/BT-3100 charger: Multiboard + screw mount versions, only 14g + 12g petg
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Lightweight tilted holder for Opus BT-C3100 / BT-3100 battery charger.
Key features:
- Minimal filament usage: main holder ~14 g (at 3 walls/perimeters) + stabilizer ~12 g (optional — needed for better stability; skip it for maximum savings)- Slight tilt for convenient battery insertion and screen reading
- Rear clearance for charger ventilation
- Parts can be glued together (e.g. superglue or plastic cement) for extra strength, but it’s not required — the design holds well without glue
Two mounting versions:
- Multiboard compatible (snaps in without screws)
- Direct screw mount (holes for standard 3–4 mm screws)
Recommended print settings:
- Material: PETG preferred (PLA not recommended)
- Walls/perimeters: 3 for Multiboard version (small pins can be fragile); 2 is sufficient for screw version
- Infill: 15%
- Layer height: 0.2 mm
- Supports: recommended — with proper model orientation, only ~0.2 g extra filament used
Files included:
- STEP
- 3MF
- Separate STL files (Multiboard holder, screw holder, stabilizer)
Printed it? Please post a Make!
Questions or suggestions? Feel free to comment!