DeWalt DCW200 to ShopVac adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to help connect a ShopVac (2.25" OD) to the DeWalt DCW200 and anything else that might use the same connection.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapter to help connect a ShopVac (2.25" OD) to the DeWalt DCW200 and anything else that might use the same connection. It has these little “balls” that should pop in to place, BUT I warn you that these are quite brittle and may snap fairly easily. It does stay somewhat attached without them in place, however. I had luck with PETG.
The “balls” might need some support for a perfect print, but I didn't have too much trouble with a bit of droopiness if you want to print without it.