Flashforge AD5X Enclosure Mod - Large Pass-through
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A large enclosed pass-through that seals the opening while allowing freer movement of the PTFE tubing.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 694
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Flashforge AD5X Enclosure Mod - Large Pass-through
A large enclosed pass-through that seals the opening while allowing freer movement of the PTFE tubing.
-Basic design.
-Increases tubing clearance, reducing strain on the extruder.
-Modified models C4 and D4 from the official (new version.4_20251110mf) AD5X enclosure.
-The slotted acrylic panel is replaced by 2 printable panels.
Printing tips (PETG):
The 'Hood' model is difficult to print. Slow and 100% cooling needed.
-Slow printing (60mm/s).
-Cooling fan 100%.
The other models can be printed on default settings.
Assembling instructions:
-After printing all 5 models replace models C4 and D4 from the original enclosure with the new ones.
-Slide down the left and right panels replacing the original slotted acrylic panel.
-Slide down the Hood with the PTFE tubing inside.
-Put back the top of the AD5X enclosure.
The original unmodified enclosure file is also included as backup.
06-22-2026 - Complete rebuild of the 'hood' model and the description page.