openGrid Torx T15 Screw Hole Cover/Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low-profile Torx T15 screw caps for openGrid that snap into the hole for a clean look.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 184
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
For a neat openGrid by David D look, I wanted to cover my Torx T15 screws with a cap. I first tried the Screw Hole Caps | openGrid by Gavin F, but they don’t work for me when there’s already a screw in the hole (they stick out way too far). So this is my solution.
The larger round section is only 3 layers thick and protrudes just slightly, so you can still remove it later to access the screw. The Torx shape on the underside lightly grips the screw head, and the round section snap-fits into the grid hole.
I enabled the Arachne wall generator and used concentric top and bottom surface pattern.
If you're looking for mounts and holders for openGrid or other mounting options, you can find my exclusive models on Cults, including designs for RIGOL DHO oscilloscopes and OWON DGE XDM devices. Use MOUNT10 for 10% off.
