1 / 14
Delta P Duct V2R2 for Zodiac Hotend I MK3S(+) — zdjęcie 1
1 / 14

Delta P Duct V2R2 for Zodiac Hotend I MK3S(+)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Optimized Delta P Fan Duct for the Zodiac Hotend

Ocena
5 / 5
Polubienia
5
Pobrania
50
Wydruki
3
Wyświetlenia
563
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Delta P Fan Duct for Zodiac Hotend

The Delta P Fan Duct by @teookie is a great design and the remix from @BuildX. 

Update 12/4/2022

Both Versions perform almost the same. But the Airflow is not good and I will do another Version that is not as low like other one (maybe only 0.8-1.0mm lowered Version).

 

I searched for a better fan duct for the Zodiac X Phaetus, but couldnt find a good one. Thats why I thoud about to remix a exsisting Fan Duct and I found the Delta P fan duct.

I made two versions of the duct:

  • 1,4mm lowered(Red)
  • 2mm lowered(Blue)

 

And redesigned the cover to fit the Zodiac Hotend.

I will test the 2mm Version to look wich one is better for partcooling.

If you downloaded the design or  like it, I  would appreciate if you give it a like and rate it, so that other can find it too.

Thank you and keep printing ;)

Print Settings

  • 0.20mm layer height
  • 3-4 perimeters
  • 20-30% infill
  • ABS or ASA (You can print the cover in PETG, but I recommend ASA or ABS)
  • Brim for better adhesion

Tagi