Delta P Duct V2R2 for Zodiac Hotend I MK3S(+)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Optimized Delta P Fan Duct for the Zodiac Hotend
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 50
- Makes
- 3
- Views
- 563
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Delta P Fan Duct for Zodiac Hotend
The Delta P Fan Duct by @teookie is a great design and the remix from @BuildX.
Update 12/4/2022
Both Versions perform almost the same. But the Airflow is not good and I will do another Version that is not as low like other one (maybe only 0.8-1.0mm lowered Version).
I searched for a better fan duct for the Zodiac X Phaetus, but couldnt find a good one. Thats why I thoud about to remix a exsisting Fan Duct and I found the Delta P fan duct.
I made two versions of the duct:
- 1,4mm lowered(Red)
- 2mm lowered(Blue)


And redesigned the cover to fit the Zodiac Hotend.

I will test the 2mm Version to look wich one is better for partcooling.
If you downloaded the design or like it, I would appreciate if you give it a like and rate it, so that other can find it too.
Thank you and keep printing ;)
Print Settings
- 0.20mm layer height
- 3-4 perimeters
- 20-30% infill
- ABS or ASA (You can print the cover in PETG, but I recommend ASA or ABS)
- Brim for better adhesion