E-flite Slow Ultra Stick 1.2m - GoPro Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for securing small action camera to E-flite 1.2m Slow Ultra Stick (SUS).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to be able to mount a small action camera to my E-flite 1.2m Slow Ultra Stick (SUS), so I designed this small bracket that fits around the fuselage and is secured with zip ties. Works with any action camera that uses the normal “GoPro” type bolt/nut. Put the nut inside the recessed side and thread the bolt in. Depending on the outer diameter of the nut, you may need to apply slight pressure/use pliers so it doesn't rotate.
Can be mounted anywhere on the “fuselage”/stick, but I find it works best right in front of/behind the wing (especially for CG purposes) and can face forward or backward.
Printed in PETG using the 0.2 Strength profile on Bambu Studio. Use auto-orient and enable tree supports.
Included a photo of a rear-facing mount while airborne.
I will likely make refinements to this in future iterations; the first item on my list is a stronger mechanism on top to hold the zip ties.