Vessel Electric Screwdriver Spacer for Wera Rapidaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spacer which greatly reduces the longitudinal 'slop' when using a Wera Rapidaptor with a Vessel electric screwdriver.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The Wera Rapidaptor is my favourite bit holder and the Vessel 220USB is my favourite electric screwdriver. Unfortunately, the Japanese spec bit holder found on most versions of the 220USB are made to accept the longer Japanese style 'anvil'. This makes using western bits a poor experience because of the excessive longitudinal play, which is especially vexing when using the driver vertically.
This is a simple spacer that fits over the 6.35mm hex shank of the Wera Rapidaptor (3888/4/1 K, 888/4/1 K, 889/4/1 K) and mitigates unwanted travel of the Rapidaptor when used with a Vessel electric screwdriver such as the 220USB-S1U or 220USBC-1 (both of which I can confirm compatibility with). It has the advantage of retaining compatibility with Japanese style bits since the spacer stays on the shank of the Rapidaptor and not on/in the screwdriver when removed.
I printed mine in ASA at 0.15mm layer height and 100% infill on a Core ONE.