1:10 RC Drift Rim & Tire Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
52mm ribbed RC rim with 60 - 64mm drift tire. Multiple clearances for perfect fit. Optimized for smooth drifting!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Unleash your RC car's drift potential with this custom-designed rim and tire set! This package includes a 52mm ribbed rim and a 60, 62 and 64mm tire, specifically engineered for optimal drift performance.
Key Features:
Versatile Fitment: Standard 12mm hex mount compatible with Tamiya, MST, Yokomo, and other major 1:10 chassis.
Drift Optimized: The combination of the ribbed rim and rigid tire material provides excellent low-friction characteristics, perfect for controlled power slides and exhilarating drift action.
Ribbed Rim Design: The 52mm diameter rim features a ribbed design for secure tire mounting and structural integrity. The set supports offsets from 0mm up to +6mm, allowing you to fine-tune your car's track width and achieve the perfect "flush" look for any body shell.
Multiple Tire Sizes (60mm, 62mm, 64mm): Experiment with different diameters to match your chassis and body shell requirements.
Adjustable Tire Clearance: To ensure a perfect fit with your 3D printer, the tire is provided in three versions with different inner diameter clearances: 0.1mm, 0.15mm, and 0.2mm.
Balanced Design: The rim is designed to accommodate at least two opposing M2.5x10 ISO7380 304 A2 Round Stainless Steel screws (e.g., button head) for balancing, crucial for high-speed stability during drifts.
Printer Compatibility Note: On an Anycubic Kobra S1 printer, the 0.1mm clearance version of the tire fits perfectly (rim & tire both PLA). However, it's recommended to choose the clearance that best suits your specific 3D printer's calibration and material shrinkage.
Recommended Print Settings:
Layer Height: 0.2mm for a good balance of speed and detail.
Supports: Support material is only required for the area where the main M4 wheel screw is inserted. The rest of the model should print without supports.
Assembly:
Print the 52mm ribbed rim.
Print the tire with your preferred size and clearance. Start with 0.1mm clearence and adjust if needed.
Mount the tire onto the rim.
Insert two opposing M2.5x10 ISO7380 304 A2 Round Stainless Steel screws into the designated holes for balancing.
Get ready to slide!
Show off your build by posting a Make. Your feedback and suggestions are always appreciated and help me improve the project!