Hidden paper towel holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Paper towel holder designed to mount on the inside of a cabinet door. Only a small part of the paper-towel is visible.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 152
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
A compact paper towel holder designed to mount on the inside of a cabinet door. Only a small part of the paper-towel is visible from the outside but compleetly usable without opening the cabinet door.
Key Features
Designed for inside-cabinet door mounting.
Hidden placement keeps the roll out of sight.
Variable width for different rolls and cabinet setups.
Easy roll replacement.
No extra hardware required (just double sided tape for mounting).
Self-locking assembly with moving parts.
Print Information (easy)
Standard PLA settings are sufficient.
Can be printed upright without support. (Tested with 0.2 mm layer height.)
Can also be printed lying down with support. (Supported printing may give slightly smoother joint movement.)
Parts
3 diffetent parts total.
Print the arm twice for a total of 4 parts on the printbed.
Mounting
Fix to the inside of the cabinet door with 2cm (3/4 inch freedom units) wide double-sided tape, for example tesa Powerstrips.
Keep in mind that the paper roll takes up some space inside the cabinet.
Position the holder so the paper towel does not get pinched by the hinge or soft-close mechanism.