POTA-Protector (FT-891 / FT-857)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect your radio, with these feature rich, side rails and integrated front cover
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
When you're out in the field, the knobs and dials are often the most vulnerable parts of the radio. The POTA-Protector adds rugged side protection and a removable front cover to help prevent damage during transport and use.
The front cover clips securely into place and is designed to float over the controls, so it protects the face of the radio without pressing on the knobs or buttons. It also includes a built-in PTT holder and a small storage compartment that is perfect for carrying a compact POTA CW key.
The side rails are designed to preserve usability. You can still remove the control face while the rails are installed, and access to the speaker/earphone jack and microphone cable passthroughs is maintained. The left rail includes an additional PTT holder, while the right rail uses a universal design that can be mounted on either side.
For portable setups, slots and strap points are included so you can attach a tuner or compact battery with Velcro straps, add a carry handle, or fit a shoulder strap.
The design uses the factory M4 screws, and all parts can be printed separately on a 250 mm × 250 mm print bed.
Features
Designed for Yaesu FT-891 and FT-857 transceivers
Front cover clips securely into place
Cover is floated over the dials and knobs to avoid contact
Front cover includes a snug-fitting PTT holder for transport
Front cover has a small storage bin, ideal for a POTA CW key
Front panel text can be customized, for example with your callsign
Access and usability
The transceiver control head can be removed while the rails remain installed
Access to the speaker/earphone jack is maintained
Access to the left and lower microphone cable passthroughs is maintained
Side rail details
The left protection rail includes a snug-fitting PTT holder for the microphone
The right protection rail is a universal design and can be used on either the left or right side of the transceiver
Mounting and transport
A tuner or compact battery can be securely attached to the transceiver using Velcro cable straps
The Velcro straps pass through integrated slits to secure the attached accessory
Slots are provided for a carry handle on the sides of the transceiver
Slits are also provided for a shoulder strap
Printing and assembly
Uses the factory-supplied M4 screws
Components can be printed individually on a 25 cm × 25 cm print bed