Canon XA11 LCD Screen Sun Hood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple snap-on sun hood designed for the Canon XA11 camera display. Helps reduce glare and improve screen visibility in
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Standard Digital File License
Description:
This is a custom-designed sun hood for the LCD screen of the Canon XA11 camera. It clips onto the display and helps block direct sunlight, making it much easier to see your screen when shooting outdoors 🎥
The fit is made specifically for the XA11, but it may also work with other cameras that have a similar screen size and shape. However, compatibility with other models is not guaranteed.
After printing, it is recommended to slightly round and sand the edges to prevent scratching the camera body. For extra protection, you can add a thin layer of soft material (like foam or tape) to the inner side where it touches the screen.
⚠ Use at your own risk – I am not responsible for any damage or scratches caused to your camera.
Printing Instructions:
Nozzle: 0.4mm
No supports needed 👍
Infill: 20%
Layer height: 0.2 mm recommended
Material: PLA or PETG
After printing, lightly sand all edges and corners to smooth them out. This will help protect your camera from scratches.