DIN rail 20x4 I2C LCD display case / mount / housing / box / angled / arduino / raspberry
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIN rail 20x4 I2C LCD display case / mount / housing
- Ocena
- 3 / 5
- Polubienia
- 8
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 353
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a 20x4 I2C LCD display holder that mounts to DIN rail so I threw together some models together to make these models and I improved some features.
I used this display, compare it to yours!
The angled version is angled at 30 degree.
I made a horizontal and a vertical mount, and screw and keyhole mounts, so take what you need!
I made the case as compact as possible, so you can either make a hole in the side and run the wires out, or bend the 4 pins towards the DIN rail giving you room to plug in.
Use M3 screws to mount display (M3x6mm).
Printed with PETG
15% infill
use supports
0.2mm layer hight
0.4mm nozzle